Setting The Domain Name; Synchronizing Date And Time Settings; Identifying The Time Source For Event Logs; Setting Time Offset - Cisco DPA 7630 Administration Manual

Configuring Network Settings

Setting the Domain Name

Step 1
Step 2
Step 3
Step 4
Step 5

Synchronizing Date and Time Settings

Identifying the Time Source for Event Logs

Step 1
Step 2
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
5-10
The domain name is the name of the Domain Name System (DNS) domain in
which the DPA 7630/7610 is located.
To set the domain name, perform these steps:
From the main menu, choose Configure.
Choose Network interface.
Choose Domain name.
Enter the domain name.
Restart the DPA 7630/7610.
The DPA 7630/7610 can synchronize its date and time settings with either a
Network Time Protocol (NTP) server or Cisco CallManager. This ensure that the
log files record the accurate date and time for diagnostic traces.
These sections describe these settings:
Identifying the Time Source for Event Logs, page 5-10
•
Setting Time Offset, page 5-11
•
• Assigning the NTP Server, page 5-12
You can synchronize the date and time setting in the event logs on the
DPA 7630/7610 with either and NTP server or Cisco CallManager.
To choose a time source, perform these steps:
From the main menu, choose Configure.
Choose Network interface.
Chapter 5 Getting Started with the DPA 7630/7610
78-11069-03