Configuring Cisco CallManager
Step 4
Step 5
Step 6
Configuring Message Waiting Indicators Using Cisco CallManager 3.2
Step 1
Step 2
Step 3
Step 4
Step 5
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
4-14
Enter these settings:
•
MessageWaitingOffDN—Specifies the directory number to which calls from
a voice mail system are directed to disable or turn off the MWI light for the
specified calling party.
•
MessageWaitingOnDN—Specifies the directory number to which calls from
a voice mail system are directed to enable or turn on a MWI light for the
specified calling party.
Click Update.
Record these values and use them to update the DPA 7630/7610. See the
"Entering MWI for Cisco CallManager" section on page
Follow these steps to configure Message Waiting Indicators for
Cisco CallManager 3.2:
From Cisco CallManager, choose Feature > Voice Mail >Message Waiting.
To enable MWI, enter the following fields:
•
Directory Number—enter directory number to which calls from a voice mail
system are directed to enable the MWI light for the specified calling party.
•
Message Waiting Indicator—choose On.
Click Insert
To disable MWI, enter the following fields:
Directory Number—enter directory number to which calls from a voice mail
•
system are directed to disable or turn off the MWI light for the specified
calling party.
Message Waiting Indicator—choose Off.
•
Record these values and use them to update the DPA 7630/7610. See the
"Entering MWI for Cisco CallManager" section on page
Chapter 4
Preparing the Cisco CallManager and Octel Systems
6-10).
6-10).
78-11069-03