Getting Started With The Dpa 7630/7610; Accessing Configuration Options - Cisco DPA 7630 Administration Manual

Accessing Configuration Options

78-11069-03
Getting Started with the
DPA 7630/7610
Before you can configure the telephony features on the DPA 7630/7610 to
interact with Cisco CallManager, Octel, and PBX systems, you must first
configure the basic network, SNMP, and password settings. These settings enable
the DPA 7630/7610 to connect to the IP network and help you manage the device.
These sections provide details about configuring these settings on the
DPA 7630/7610:
Accessing Configuration Options, page 5-1
•
• Configuring Network Settings, page 5-4
Configuring Passwords, page 5-13
•
• Configuring SNMP Settings, page 5-15
You can access the Cisco DPA 7630/7610 configuration options, after the device
has started up, using a console terminal connected to the RJ-45 console port or
through a Telnet session.
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
C H A P T E R
5
5-1