Settings In The Menu; Operating The Menu - KERN ITS Operating Instruction

ITS-BA-e-0720

4 Settings in the menu

4.1
4.1.1
Operator menu
Supervisor menu
Note
User manual ME-Nr.:22017077 01/07
Settings can be changed and functions can be activated in the menu. This enables
adaptation to individual weighing requirements.
The menu consists of 6 main blocks containing various submenus on several levels.

Operating the menu

Calling up the menu and entering the password
The menu differentiates between 2 operating levels: Operator and Supervisor. The
Supervisor level can be protected by a password. When the device is delivered, both
levels are accessible without a password.
1. Press and keep it pressed until COdE appears.
2. Press again.
The menu item tErMINL appears. Only the submenu dEVICE is accessible.
1. Press and keep it pressed until COdE appears.
2. Enter the password and confirm with
The first menu item SCALE appears.
No supervisor password has been defined when the device is first delivered. Therefore
respond to the password inquiry with
If a password has still not been entered after a few seconds, the scale returns to weigh-
ing mode.
Emergency password for Supervisor access to the menu
If a password has been issued for Supervisor access to the menu and you have for-
gotten it, you can still enter the menu:
➜ Press
3 times and confirm with
.
when you call up the menu for the first time.
.
Settings in the menu
22