Table of Contents
Advertisement
Interface description
5 Interface description
5.1
5.1.1
Command
LEVEL 0
@
I0
I1
I2
I3
I4
S
SI
SIR
Z
ZI
LEVEL 1
D
DW
K
SR
T
TA
TAC
TI
LEVEL 2
C2
C3
I10
I11
P100
P101
P102
PWR
37
SICS interface commands
The terminal supports the command set MT-SICS (METTLER TOLEDO Standard Inter-
face Command Set). With SICS commands, it is possible to configure, query and
operate the terminal from a PC. SICS commands are divided up into various levels.
Available SICS commands
Meaning
Reset the scale
Inquiry of all available SICS commands
Inquiry of SICS level and SICS versions
Inquiry of scale data
Inquiry of scale software version
Inquiry of serial number
Send stable weight value
Send weight value immediately
Send weight value repeatedly
Zero the scale
Zero immediately
Write text into display
Weight display
Keyboard check
Send and repeat stable weight value
Tare
Tare value
Clear tare
Tare immediately
Calibrate with the external calibration weight
Calibrate with the internal calibration weight
Inquire or set scale ID
Inquiry of scale type
Print out on the printer
Print out stable weight value
Print out current weight value immediately
Power On/Off
ITS-BA-e-0720
User manual ME-Nr.:22017077 01/07
Advertisement
Table of Contents
