Event and error messages
Error
Weight display unstable
Incorrect weight display
43
Cause
•
Unstable weight value when
referencing
•
Printout not yet ended
•
Switching the weighing unit
impermissible during dynamic
weighing
•
EAROM checksum error
•
Restless installation location
•
Draft
•
Restless weighing sample
•
Contact between weighing pan
and/or weighing sample and
surroundings
•
Mains fault
•
Incorrect zeroing
•
Incorrect tare value
•
Contact between weighing pan
and/or weighing sample and
surroundings
•
Scale tilted
Remedy
➜ Ensure stable surroundings
➜ Ensure that the weighing pan is
freely movable
➜ Adjust vibration adapter
➜ End printout
➜ Repeat required action
➜ End dynamic weighing
➜ Switch weighing unit
➜ Unplug the mains plug then plug
it back in; switch unit off and then
back on in battery mode
➜ Contact your dealer or local rep-
resentative
➜ Adjust vibration adapter
➜ Avoid drafts
➜ Dynamic weighing
➜ Remedy contact
➜ Check mains
➜ Unload scale, set to zero and
repeat weighing operation
➜ Clear tare
➜ Remedy contact
➜ Level scale
User manual ME-Nr.:22017077 01/07
ITS-BA-e-0720