Configuring Interfaces (Communication) - KERN ITS Operating Instruction

ITS-BA-e-0720
4.6
4.6.1
Print
A.Print
CONtINU
dIALOG
CONt.OLd
dIAL.OLd
dt-b
GROSS
tArE
nEt
dt-G
COnt-Wt
COnt-Ct
2nd.dISP
rEF
bULK
AuXILIA
4.6.2
tEmPLat
StdArd
tEmPLt1
tEmPLt2
ASCi.FmtT
LINE.Fmt
LENGtH
SEPArAt
Add LF
User manual ME-Nr.:22017077 01/07

Configuring interfaces (COMMUNICATION)

COM1/COM2 -> MODE – operating mode of the serial interface
Manual data output to the printer with
Automatic output of stable results to the printer (e. g. for series weighing operations)
Ongoing output of all weight values via the interface
Bi-directional communication via MT-SICS commands, control of the scale via PC
As per CONtINU, see above, but with 2 fixed blanks in front of the unit (compatible
with Spider 1/2/3)
As per dIALOG, see above, but with 2 fixed blanks in front of the unit (compatible
with Spider 1/2/3)
DigiTOL-compatible format.
• Transfer of the gross weight, identified with "G"
•
Transfer of the tare weight
•
Transfer of the net weight
As per dt-b, see above, gross weight identified with "G"
TOLEDO Continuous mode
TOLEDO Continuous mode, transfer of the number of pieces
For connecting a second display (automatically activates the 5-V voltage supply at
Pin 9)
Data transfer from the reference scale (automatic switchover)
Data transfer from the quantity scale (automatic switchover)
Data transfer from the reference or quantity scale (manual switchover)
COM1/COM2 -> PRINTER – settings for protocol printout
This menu item only appears if the mode "Print" or "A.Print" is selected.
Selecting protocol printout
• Standard printout
•
Printout in accordance with Template 1
•
Printout in accordance with Template 2
Selecting formats for the protocol printout
•
Line format: MULtI (multi-line) or SINGLE (single-line)
• Line length: 0 ... 100 characters, appears only with line format MULtI
•
Separator: , ; . / \ _ and space; appears only with line format SINGLE
•
Line feed: 0 ... 9
Settings in the menu
33