Counting With Two Scales - KERN ITS Operating Instruction

ITS-BA-e-0720
3.7
3.7.1
Note
3.7.2
Note
User manual ME-Nr.:22017077 01/07

Counting with two scales

For piece counting, it is possible to connect a second scale or weighing platform, e. g.
a floor scale for counting a large number of pieces via the optional analog second
scale interface.
The necessary settings for the application and interface parameters are described in
the Sections 4.4.1, 4.6.1 and 4.6.4.
Counting with a reference scale
Prerequisite
The connected second scale is configured as reference scale.
1. Place the reference parts on the reference scale and press
The scale determines the average piece weight and changes to the display in
pieces (PCS).
2. Place the parts to be counted on the first scale.
The total quantity is displayed.
• If tOtAL-Ct -> bULK is set in the menu, only the number of pieces on the bulk
scale is displayed.
•
If tOtAL-Ct -> bOtH is set in the menu, the reference quantity is added to the
bulk quantity.
Counting with a bulk scale
Prerequisite
The connected second scale is configured as bulk scale.
1. Place the reference parts on the first scale and press
The scale determines the average piece weight and changes to the display in
pieces (PCS).
2. Place the parts to be counted on the bulk scale.
The total quantity is displayed.
•
If tOtAL-Ct -> bULK is set in the menu, only the number of pieces on the bulk
scale is displayed on the bulk scale.
•
If tOtAL-Ct -> bOtH is set in the menu, the reference quantity is added to the
bulk quantity.
Counting
or .
or .
20