Reference Optimization; Counting With Automatic Reference Determination - KERN ITS Operating Instruction

Counting
3.5
3.5.1
Note
3.6
19

Reference optimization

The greater the reference quantity, the more accurately the scale determines the
number of pieces.
Automatic reference optimization
rEF.OPt -> AUtO must be set in the menu for this. The symbol Auto Opt appears
in the display.
1. Place the reference parts on the scale and press
2. Place additional reference parts, max. the same number as for the first reference
determination, on the scale.
The scale automatically optimises the average piece weight with the larger number
of reference parts.
The rest of the counting process is as described earlier.
The reference optimization can be performed several times.

Counting with automatic reference determination

Prerequisite
A-SMPL ON is set in the menu.
➜ Place the number of pieces displayed above the key
The scale automatically determines the average piece weight and then shows the
quantity.
The rest of the counting process is as described earlier.
ITS-BA-e-0720
or .
into the container.
User manual ME-Nr.:22017077 01/07