Counting With Target Piece Number; Set Target Piece Number - KERN CIB Operating Manual

7.6 Counting with target piece number

This function can be used to program a target number of pieces. Reaching the target
value is now supported by an optical and an acoustic signal:
Target value
Placed piece number less
than target value
The placed piece number
corresponds to the target
value
Placed piece number over
target value

7.6.1 Set target piece number

First determine the piece weight as
specified in chap. 7.1 or 7.2.
Press and enter target piece
number via the numeric keyboard.
Acknowledge with
displayed, the function is enabled.
The balance changes automatically into
target piece counting mode.
Count-in the parts, when display green and no signal sounds, the target piece
number is reached.
24
Optical signal
Display background
illumination lights yellow
Display background
illumination lights green
Display background
illumination lights red
. „On" is shortly
Audio signal
Slow beeping
No beeping
Fast beeping
(example)
(example)
(example)
CIB-BA-e-2010