Automatic Optimization Of The Reference Value - KERN ALJ Operating Instruction

12.1.3 Automatic optimization of the reference value

To improve the counting accuracy, the reference value can be optimized by adding
new pieces. For every reference value optimization, the reference weight will be
recalculated. As the additional pieces increase the calculation base, the reference
value also becomes more accurate.
 After the reference weight is set, place the appropriate number of pieces on the
scale plate.
 Double the number of pieces on the scale plate and wait for the audible signal.
The reference weight will be recalculated.
 Or repeat the reference value optimization, by adding new pieces (max. 255
pieces) or start the counting process.
The automatic optimization of the reference value is inactive when you
enter the reference weight value in a numerical form.
TALJG_A/TALSG_A/TPLJG_A/TPLSG_A-BA-e-2112 63