Switching Over Between Quantity And Weight Display; Automatic Reference Optimization - KERN ALS Series Operating Manual

Analytical and precision balances

Hide thumbs Also See for ALS Series:

Table of Contents

11.1.1 Switching over between quantity and weight display

 Place load on pan and read the number of pieces.

 Press MENU button, the total weight of the placed parts is displayed.

 Press the MENU button and keep it pressed until the acoustic signal gets mute,

the average weight of a single piece is displayed.

 Back to quantity display press MENU button again.

In order to improve the counting exactness, the reference can be optimised by

adding more pieces. At every reference optimisation, the reference weight is

calculated anew. As the additional pieces increase the base for the calculation, the

reference also becomes more exact.

 Leave the piece number on the weighing plate after setting the reference weight

 Duplicate the number of pieces on the weighing plate and wait until the acoustic

signal sounds. The reference weight is calculated anew.

 Either repeat the reference optimisation by adding more pieces (max. 255 pieces)

or start the counting process.

The automatic reference optimisation is not active when the reference

weight is entered numerically.

ALJ/ALS/PLJ/PLS-BA-e-1943

Table of Contents