Configuration (Setup Menu) - Sartorius Element Series Operating Instructions Manual

Configuration (Setup Menu)

To configure the balance/scale; i.e., adapt the balance/scale to individual requirements.
Step
1. Switch off the balance/scale
2. Switch on the balance/scale and
while all segments are displayed
Navigation in the Setup Menu
Key Press briefly
Enter
Menu level: Move to the right (cyclical)
CF
v
Menu item: Scrolling
w
Menu level: Move to the left
Parameter Settings (Overview)
Setup 1 Weighing
menu
5. and 6.
8. Additional
functions
9. Reset menu
1.1. Adapt filter
1.2. Application filter
1.3. Stability range
1.5. Calib./adjust./linearization:
Function of the Q key
1.6. Auto zero
1.7. 1st weight unit, or 2nd unit
in Toggle Weight Units app.
Only relevant with built-in data interface: see corresponding interface description
8.1. Block key functions
8.2. Automatic shut-off
9.1. Factory settings
Key (or instruction)
e
e
w briefly
Press and hold
Confirm setting
–
Save settings and exit Setup
ο Factory setting √ User-defined setting
1.1.1
ο Stable conditions
1.1.2
1.1.3
1.1.4
ο Final readout
1.2.1
1.2.2
1.3.1
1.3.2
1.3.3
ο 2 digits
1.3.4
1.3.5
ο Calibration/span adjustment
1.5.1
1.5.2
1.5.3
ο On
1.6.1
1.6.2
1.7.1
to 1.7.23
8.1.1
ο All keys unblocked
8.1.2
ο After 2 minutes
8.2.1
8.2.2
8.2.3
9.1.1
ο Do not restore
9.1.2
Display
Very stable conditions
Unstable conditions
Very unstable conditions
Filling
1/4 digit
1/2 digit
1 digit
4 digits
Linearization: for service
personnel only
Key blocked
Off
User-defined unit: see
"Toggling between Weight
Units"
All keys blocked except
for e and w
After 5 minutes
After 10 minutes
Restore
15