Totalizing - Sartorius Element Series Operating Instructions Manual

Totalizing

Purpose
With this application program you can add up successive weight values exceeding the
capacity of the balance/scale.
Example: Totalizing weight values
Step
1. Select application program
2. Select Totalizing
3. Confirm setting
Symbol " " on the display:
application is active
4. If necessary: zero the balance/scale
5. Place sample on balance/scale
(in this example, 380 g)
6. Store value in memory. Total weight is
displayed steadily; ∑ symbol flashes.
7. Remove sample from balance/scale
8. Place the next sample
on the balance/scale
(in this example, 575 g)
9. Store value in memory. Totalized stored
weight is displayed; symbol ∑ flashes.
Note: ∑ symbol remains on indicating
stored value in memory until cleared
10. To view the current weight for 2 seconds
(if a printer is connected, a printout
is generated)
11. Clear totalizing memory
(if a printer is connected, total is printed)
12. End Totalizing
13. Reactivate Totalizing (if no other
application program has been selected)
(if a printer is connected, total is printed).
14. Repeat procedure starting from Step 6.
12
Key (or instruction)
w > 2 sec
v repeatedly
Enter
CF
w
Enter
CF
Enter
CF
v
v > 2 sec
Enter > 2 sec
CF
v
Display