Counting - Sartorius Element Series Operating Instructions Manual

Counting

Purpose
With the Counting program you can determine the number of parts or items by weighing.
Example: Determine the number of uncounted parts; weigh in the selectable reference
sample quantity (in this example: 20)
Step
1. Select application program
2. Select Counting
3. Confirm setting
Symbol " " on the display:
application is active
4. Place empty container on the
balance/scale
5. Zero the balance/scale
6. Place reference sample quantity (20)
on the balance/scale
7. Select reference sample quantity:
in increments of 1 (1, 2, 3, ..., 99) or
in increments of 10 (10, 20, 30, ...,100)
8. Confirm selected reference sample
quantity
9. Place uncounted parts on balance/scale
10. Toggle display between mean
piece weight, total weight, and quantity
11. Unload the balance/scale
12. Counting application:
clear the reference value
13. Reactivate Counting (if no other
application program has been selected)
14. Repeat procedure starting from Step 5
Key (or instruction)
w > 2 sec
v repeatedly
Enter
CF
w
v repeatedly (briefly) or
v > 2 sec.
Enter
CF
v repeatedly
> 2 sec
Enter
CF
v
Display
9