Logic Thresholds; Ipd Dci-100 Threshold Control Assignments; Figure 39. Dci-100 Connectors - Vision VA61 User's Reference Manual

VA6x User's Reference

Logic Thresholds

Three threshold controls are provided to control the various inputs. These thresholds are serially
programmed using the VA-Genie Camera Setup utility. Threshold values you set are retained in
EEPROM after power is disconnected, and used when power is restored.
Threshold 1
Threshold 2
Threshold 3
Pin 1
Pin 2
Input
Connector
Power Input
for DCI-100
and Cameras
Pin 20
64

IPD DCI-100 Threshold Control Assignments

Camera 1
Camera 2
Serially readable inputs

Figure 39. DCI-100 Connectors

405-00022-00
Pin 1
Pin 2
Output
Connector
Pin 20
Rev 06; 7 April 2011