Appendix A. Connectors And Pinouts; Camera Power And Control Connectors; Camera Control Pinout; Figure 14. Camera Power And I/O Connectors - Vision VA61 User's Reference Manual

405-00022-00
This section provides the connector pinout information for each of the VA61 external interfaces.

Camera Power and Control Connectors

Camera image data is carried through RJ45 Ethernet connectors. Camera control signals and
power are available on two DB15 connectors. The location and pinout for the D-Sub connectors
are shown below. Each D-Sub cable can supply up to 0.5 A at +12 Volts from chassis power.
Pin number
1, 2, 3
4
5, 10
6
7
8
9
12
13
14
15
Rev 06; 7 April 2011
CONNECTORS AND PINOUTS
Pin 1

Figure 14. Camera Power and I/O Connectors

Camera Control Pinout

Description
Not Connected
Camera Input 2 –
Power Ground
Camera Output 2 –
Camera Output 1 –
Camera Input 1 –
Camera Input 2 + (trigger)
Camera Output 2 + (strobe)
Camera Output 1 +
Camera Input 1 +
+12 Volts (0.5A)
VA6x User's Reference
APPENDIX A
Direction
Out of VA61
In to VA61
no connection
no connection
Out of VA61
In to VA61
no connection
no connection
35