Figure 37. Saving And Naming Configuration File - Vision VA61 User's Reference Manual

VA6x User's Reference
You should also save your configuration settings to a Camera Configuration file.
5. In the main CamExpert window, click the "file save" button or select "File>Save".
6. Change the "Camera Mode" and "Configuration" fields to describe your camera settings.
For example; change the "Camera Mode" to "EdgeTrigger" and change the "Configura-
tion" to "10msExposeandStrobe" (or something that matches your operation, or product
line). Notice the camera file name changes to match your entries.
7. Use the default directory.
8. Click "Save".
The camera configuration has to be saved to the memory of every camera in the device list. You
can repeat the process for each camera if they will be different. If all cameras are the same model
and same settings, you can load the Camera Configuration file you just saved, and then save the
settings to each camera's memory.
When you are finished setting up all cameras, close CamExpert.
56

Figure 37. Saving and Naming Configuration File

405-00022-00
Rev 06; 7 April 2011