Appendix F. Dci-100 Camera Interface Module; Connectors; Features; Cables Available - Vision VA61 User's Reference Manual

405-00022-00 VA6x User's Reference
APPENDIX F
DCI-100 CAMERA INTERFACE MODULE
The DCI-100 Camera Interface module provides a simple interface to the power and I/O on the
Genie series GigE cameras.

Connectors

1x Serial (9 pin Female) RS232
2x Camera Connectors
2x IO Connectors (Terminal block header Double stacked 5mm pitch)
2x Power Connector (Terminal block header Double stacked 5mm pitch)

Features

Dimensions: 4.8(l) x4.4(w) x1.5 (d) inch
Din Rail Mountable
Support for two Cameras (12V 0.5A each max)
Single Supply input ( 24V 1A Max)
Serial Port Control for threshold and also 4 Inputs and 4 outputs
8 Opto Isolated polarity insensitive inputs
8 Opto Isolated polarity insensitive Solid State Relay Outputs ( 300 mA 30V Max)
User power outputs ( 5V @ 100mA and 12V @ 100mA)
All inputs and outputs have LED indicators to determine activity.

Cables Available

Part number A–CAB–GTP–xx available in 3 meter, 5 meter and 10 meter lengths.
Connects the Hirose 12–pin connector on the Genie camera to the 15–pin camera connectors on
the DCI–100. Supplies power to the camera, and access to the 2 camera inputs, and 2 camera
outputs. Use one cable for each Genie camera.

Power

The DCI–100 requires +24 Volt power input at 1 Ampere Maximum.
Rev 06; 7 April 2011 63