VA6x User's Reference
Camera Configuration Settings
The Genie cameras store the configuration settings (I/O, shutter speed, white balance) in memory
(EEPROM).
1. Open the Sapera CamExpert program (Start>Programs>Dalsa>Sapera LT>CamExpert).
See Figure 24.
NOTE
For all color cameras, you must perform or repeat "White Balance" calibra-
tion after the camera is in its final location and has final illumination and expo-
sure setting. White balance calibrates or compensates for changes in illumina-
tion.
All connected cameras are listed under the Device "pane" in the CamExpert utility.
Parameters
46
Figure 24. The CamExpert Window
Image Display
Messages
Rev 06; 7 April 2011
405-00022-00