405-00022-00
VA6x User's Reference
Components
Figure 1 illustrates the physical components associated with a typical VA61 installation. Infor-
mation on connector pinouts and electrical characteristics can be found in this Chapter, or in Ap-
pendix A starting on page 35.
detector
Kicker
Breakout
Module
1
2
1
2
+24
VDC
Figure 1. VA61 Installation
NOTE: Not all of the physical interfaces are used by the VA61 software. They are, however, avail-
able to the user for interfacing with third party products, if required.
CAUTION: The enclosure includes air intake holes at the rear of the unit and a small exhaust fan
on the front. For the continued reliability of the system, it is important that these areas are not
obstructed when the unit is mounted.
Rev 06; 7 April 2011
15