Table of Contents
Advertisement
405-00022-00
Camera Connections
The standard camera that ships with the product has a resolution of 640x480 pixels, but this is
expandable up to 1600x1200. Different size cameras are available to suit application space
constraints.
Teledyne DALSA offers cameras for use with our vision systems, some of which are referenced
below. See also directory: D:\PDF Manuals for available camera manuals.
NOTE
When you order the camera from Teledyne DALSA with the VA61, it will be
tested with the cables and Vision Appliance that are being shipped to you. Fur-
thermore, the VA61will have the appropriate configuration file loaded, making
for a smooth out-of-the-box experience.
The camera interface supports:
• 2 camera inputs, supporting progressive scan digital GigE (Gigabit Ethernet) cameras with
standard or double-speed capabilities. Sherlock supports 2 asynchronous cameras. iNspect
and iLabel solutions support synchronous cameras; multiple cameras in a single Solution must
be synchronous. iNspect and iLabel do not support color cameras.
The following cameras are offered by Teledyne DALSA. Consult Teledyne DALSA for alternate
choices if required.
Model
Genie* M640 monochrome
Genie M1024 monochrome
Genie M1400 monochrome
Genie M1600 monochrome
Genie C640
Genie C1024
Genie C1400
Genie C1600
* Standard camera that ships with the VA61.
Sherlock uses a separate configuration file, usually found in the \IFC\Config directory.
Camera Settings
NOTE
Cameras ordered with the VA61 are configured with two different IP Addresses
that match the two different GigE Port addresses on the VA61. The cameras can-
not be swapped between the two camera ports.
Rev 06; 7 April 2011
Recommended Camera List
Type
Resolution
640x480
1024x768
1360x1024
1600x1200
color
640x480
color
1024x768
color
1360x1024
color
1600x1200
VA6x User's Reference
Full frame speed
64 fps
20 fps
15 fps
12 fps
64 fps
20 fps
15 fps
12 fps
17
Advertisement
Table of Contents
