405-00022-00
VA6x User's Reference
The hardware installation is now complete, and you can proceed to setting up the inspection.
Refer to the separate User's Reference Manuals for iNspect, iLabel, or Sherlock.
detector
Kicker
Breakout
Module
+24
VDC
Figure 13. VA61 Installation
NOTE: Not all of the physical interfaces are used by the VA61 software. They are, however, avail-
able to the user for interfacing with third party products, if required.
CAUTION: The enclosure includes air intake holes at the rear of the unit and a small exhaust fan
on the front. For the continued reliability of the system, it is important that these areas are not
obstructed when the unit is mounted.
Rev 06; 7 April 2011
29