VA6x User's Reference
The VA-Genie Camera Setup program can be closed after the IP address is assigned. You do not
need to save any settings from this program. Sherlock, iNspect and iLabel do not use camera
settings from the VA-Genie Setup program. You can use this program to customize the I/O set-
tings for the Camera's Power and I/O Connectors for use with Sherlock. Or you can use one of the
files included with the VA61 at D:\VAGenie\Config. The camera settings are deleted in these
files because they are not used by Sherlock.
44
Figure 21. VA-Genie Camera Setup Utility
Figure 22. Ports in VA-Genie Camera Setup
CamPort1 I/O connector
CamPort2 I/O connector
Genie Camera (1)
405-00022-00
Rev 06; 7 April 2011