CyberData 011098 Series Operation Manual page 75

2. Plug the Ethernet cable into the Speaker Assembly.
3. At this point:
•
•
4. To fasten the speaker:
•
Note
•
Operations Guide
Operational and Linked to the Network"
drop ceiling mounting
For
its screw holes align with those you prepared.
For drywall mounting
prepared, and position the VoIP SPEAKER ASSEMBLY over them, aligning the screw
holes in the assembly with the anchors.
drop ceiling mounting
For
THUMB NUTS, and #8 FENDER WASHERS to secure the speaker.
For weak ceiling tile, CyberData offers a reinforcing mount (CyberData part number
010991A).
For drywall mounting
explains how the Link and Status LEDs work.
, position the VoIP SPEAKER ASSEMBLY in the ceiling so that
, place the three PLASTIC RIBBED ANCHORS in the holes you
, use the three 8-32 x 1 1/4" MOUNTING SCREWS, #8 NYLON
, use the three #8 SHEET METAL SCREWS to secure the speaker.
930274O
Section 2.2.3, "Confirm that the Speaker is
CyberData Corporation
67
Mount the Speaker