Upgrade The Firmware And Reboot The V2 Speaker - CyberData 011098 Series Operation Manual

2.3.13 Upgrade the Firmware and Reboot the V2 Speaker

2.3.13.1 Upgrade the Firmware
To upload the firmware from your computer:
1. Retrieve the latest V2 Speaker firmware from the VoIP V2 Speaker Downloads page at:
2. Unzip the V2 Speaker version file. This file may contain the following:
•
•
3. Log in to the V2 Speaker home page as instructed in
Operations Guide
Caution
When upgrading to firmware version 6.x.x from version 5.x.x or earlier, your
device configuration settings will be lost because the way that the device stores
the configuration settings is different in version 6.x.x.
GENERAL ALERT
http://www.cyberdata.net/products/voip/digitalanalog/ceilingspkr2/downloads.html
Firmware file
Release notes
Home Page".
Upgrade the Firmware and Reboot the V2 Speaker
Section 2.3.3, "Log in to the Configuration
930274O
Installing the VoIP V2 Speaker
CyberData Corporation
57