CyberData 011098 Series Operation Manual page 66

4. Click the Update Firmware button to open the Upgrade Firmware page. See
5. Click Browse, and then navigate to the location of the V2 Speaker firmware file.
6. Click Submit.
Note
Note
Operations Guide
Figure 2-27. Upgrade Firmware Page
This starts the upload process. Once the V2 Speaker has uploaded the file, the Uploading
Firmware countdown page appears, indicating that the firmware is being written to flash.
The V2 Speaker will automatically reboot when the upload is complete. When the
countdown finishes, the Upgrade Firmware page will refresh. The uploaded firmware
filename should be displayed in the system configuration (indicating successful upload and
reboot).
The way that the integrity of the configuration file is validated has changed. There is no
problem with updating the firmware but if you downgrade (or downgrade, make some
changes, and then upgrade again) the device may think that the configuration is corrupt
and restore defaults.
930274O
Installing the VoIP V2 Speaker
Upgrade the Firmware and Reboot the V2 Speaker
CyberData Corporation
58
Figure 2-27.