To mount the speaker:
1. Use the TEMPLATE to cut the speaker hole and prepare holes for the screws
Plastic Ribberd Anchor (3x)
Operations Guide
template is located on the back page of the
with each speaker.
Dry Wall Mounting Kit
#8 Nylon Thumb Nut (3x)
#8 Fender Washer (3x)
*Ceiling Tile or Dry Wall
*Optional Reinforcement Mount
P/N: 010991A (Sold Seperately)
Template
VoIP V2 Speaker
Assembly
Dry Wall Mounting Kit
#6 Screw (3x)
Ceiling Mounting Screw
#8-32x1 1/4" (3X)
Installation Quick Reference Guide
Figure A-1. VoIP Speaker Assembly
930274O
Mount the Speaker
(Figure
A-1). This
that is delivered
CyberData Corporation
66