Figure 4-17: Chassis Support Screws - IEI Technology AFL2-12A-HM65 Series User Manual

AFL2-12A-HM65 Series Panel PC
Step 7: Align the mounting screws on the monitor rear panel with the mounting holes on
the bracket.
Step 8: Carefully insert the screws through the holes and gently pull the monitor
downwards until the monitor rests securely in the slotted holes (
Ensure that all four of the mounting screws fit snuggly into their respective
slotted holes.
NOTE:
In the diagram below the bracket is already installed on the wall.

Figure 4-17: Chassis Support Screws

Step 9: Secure the panel PC by fastening the captive screw of the wall-mounting
bracket. ( F igure 4-18).
6
F igure 4-17).
6
Page 41