Figure 2-7 Pnp/Pci Configuration Screen - Advantech MIC-3359 User Manual

speed the CPU itself uses when communicating with its own special components. This
section covers some very technical items and it is strongly recommended that only
experienced users should make any changes to the default settings.

Figure 2-7 PNP/PCI configuration screen

Reset Configuration Data
Normally, you leave this field Disabled. Select Enabled to reset Extended System
Configuration Data (ESCD) when you exit Setup if you have installed a new add-on
and the system reconfiguration has caused such a serious conflict that the operating
system can not boot. The settings are: Enabled and Disabled (Default).
Resource Controlled By
The Award Plug and Play BIOS has the capacity to automatically configure all the boot
and Plug and Play compatible devices. However, this capability means absolutely
nothing unless you are using a Plug and Play operating system such as Windows®
95/98. If you set this field to "manual," choose specific resources by going into each
of the sub menus that follow this field (a sub menu is preceded by a "Y"). The settings
are: Auto (ESCD) (Default), Manual.
MIC-3359 User Manual --- Page 28