2.1.1 Standard CMOS Setup
The items in Standard CMOS Setup Menu are divided into 11 categories. Each
category includes one or more setup items, or none. Use the arrow keys to highlight
the item and then use the <PgUp> or <PgDn> keys to select the value you want for
each item.
Figure 2-2 Standard CMOS setup screen.
Primary Master/Primary Slave/Secondary Master/Secondary Slave: Press PgUp/<+>
or PgDn/<-> to select Manual, None, Auto type. Note that the specifications of your
drive must match with the drive table. The hard disk will not work properly if you enter
improper information for this category. If your hard disk drive type is not matched or
listed, you can use Manual to define your own drive type manually. If you select
Manual, the system will prompt for related information for the following items. Enter
the information directly from the keyboard. This information should be provided in the
documentation from your hard disk vendor or the system manufacturer.
2.1.2 Advanced BIOS Features Setup
The "Advanced BIOS FEATURES" screen will appear after the BIOS FEATURES SETUP
item from the CMOS SETUP UTILITY Menu was chosen. This screen allows the user to
MIC-3359 User Manual --- Page 17