Advantech MIC-3359 User Manual page 33

IDE bus master driver). If your hard drive and your system software both support
Ultra DMA/33 and Ultra DMA/66 and Ultra DMA/100, select Auto to enable BIOS
support. The settings are: Auto (Default), Disabled.
USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB) 1.1 controller.
The settings are: Enabled (Default), Disabled.
USB 2.0 Controller
Select Enabled if your system contains a Universal Serial Bus (USB) 1.1/2.0 controller.
The settings are: Enabled (Default), Disabled.
USB Keyboard/Mouse Support
Select Enabled if you use USB KB/Mouse in DOS mode. Default is Disabled.
AC 97 Audio
Default is Auto.
Init Display First
User can choose display priority on either peripheral PCI slot or on board VGA chip.
There are 2 options: PCI slot (Default) and On board.
LAN1 Front Panel Controller
The item allows you to choice LAN1 connective way. There are 3 options: Front
(Default), 2.16 and Rear
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple sector
MIC-3359 User Manual --- Page 25