Single P2P Bridge - Advantech MIC-3359 User Manual

Compact Mechanical Design
® ®
The MIC-3359 has a CPU heatsink specially designed for the mobile Intel Pentium
® ®
4-M and Intel Pentium 4 processor, enabling the MIC-3359 to operate without a
cooling fan on the heat sink. It needs only cooled air from the chassis fans for
ventilation.

Single P2P Bridge

The MIC uses the Pericom PI7C8150MA MHz PCI-to-PCI Bridge, which designed for
bus expansions, programmable data transfer rate control, and frequency conversions.
The Pericom Bridge can drive up to seven PCI slots in master mode, including those
using bus master cards. Up to eight MIC-3359 units can be installed in one enclosure.
Complete I/O Functions
The MIC-3359 offers all the I/O functions of an industrial computer with the rugged
Euroboard form factor. Output cables are fully connected to the rear I/O module via
user-define connectors (J3 and J5) on the backplane. The I/O panel contains two
10/100 base Ethernet ports (one of them is optional ), two COM ports, two USB 2.0
ports, one VGA connector, one PS/2 keyboard port, one PS/2 mouse port, and one
parallel port. The front panel also has a reset button and LEDs for power status and
HDD operation. The built-in high speed IDE controller provides two separate IDE
channels with Ultra DMA/33/66/100 mode. One is for CF on board, and the other one
is for IDE devices. The user-defined J3 connector is designed to support one IDE
device, one floppy drive, one printer device, and one or two Ethernet networks. These
drives can simply be connected to the backplane or to the rear transition board for
easy service and maintenance.
MIC-3359 User Manual --- Page 3