Fold And Tumble Rear Seat - Two Door Models - Jeep 2010 Wrangler Owner's Manual

JOBNAME: CHRY OM INTL (Conten PAGE: 82 SESS: 2 OUTPUT: Wed Aug 25 08:13:16 2010 SUM: 2500AF22
/chry_pdm/chrysler/owners/wra/og
Front Head Restraints
To raise the head restraint, pull upward on the
head restraint. To lower the head restraint,
press the adjustment button, located on the
base of the head restraint, and push downward
on the head restraint.
art=030933390.tif
NOTE:
The rear head restraints are not adjustable.
To remove the head restraint, pull upward on
the head restraint to it's highest position, push
in both buttons at the base of each head
restraint rod, and simultaneously pull up on the
head restraint.
80
NO TRANS
Adjustment Button
Rear Head Restraints
The rear seat is equipped with nonadjustable
head restraints. Refer to "Occupant Restraints"
in "Things to Know Before Starting Your Ve-
hicle" for information on child seat tether rout-
ing.
Fold and Tumble Rear Seat — Two
Door Models
NOTE:
• Prior to folding the rear seat, it may be
necessary to reposition the front seats.
• Be sure that the front seats are fully
upright and positioned forward. This will
allow the rear seat to fold down easily.
1. Lift the seatback release lever and fold the
seatback forward.
art=030933901.tif NO TRANS
Rear Seat Release
2. Slowly flip the entire seat forward.
art=030933924.tif NO TRANS
Folding Rear Seat