JOBNAME: CHRY OM INTL (Conten PAGE: 129 SESS: 2 OUTPUT: Wed Aug 25 08:13:16 2010 SUM: 1645A8EF
/chry_pdm/chrysler/owners/wra/og
art=036201710.tif
NO TRANS
13. The swing gate brackets do not need to be
removed unless the hard top is being installed.
To remove the swing gate brackets, pull the
front of the bracket forward while rolling the
entire bracket back in toward the vehicle to
disengage.
art=036201711.tif
NO TRANS
14. Grasp the front side bow behind the
header, and lift the top.
art=036007403.tif
NO TRANS
15. Fold back the front section of the top,
pulling the fabric rearward. Gently rest the
header on top of the rear portion of the deck.
art=036007404.tif
NO TRANS
16. Fold the top so that the material forms a
W as shown. Enter the vehicle and move the
material into two folds.
127