Jeep 2010 Wrangler Owner's Manual page 115

JOBNAME: CHRY OM INTL (Conten PAGE: 115 SESS: 2 OUTPUT: Wed Aug 25 08:13:16 2010 SUM: 17BCAE8F
/chry_pdm/chrysler/owners/wra/og
art=035801675.tif NO TRANS
13. The swing gate brackets do not need to be
removed unless the hard top is being installed.
To remove the swing gate brackets, pull the
front of the bracket forward while rolling the
entire bracket back in toward the vehicle to
disengage.
art=035801676.tif NO TRANS
14. Completely release the latches from the
loops on the windshield frame. If your vehicle
is not equipped with the Sunrider package,
proceed to Step 15.
art=035801677.tif NO TRANS
15. Make sure the plastic sleeves are slid
rearward over the Sunrider link (Sunrider
Models only).
art=035801678.tif NO TRANS
16. Unlatch the side bows from both door rails
(Sunrider Models only).
113