A Word About Your Keys; Ignition Key Removal; Key-In-Ignition Reminder - Jeep 2010 Wrangler Owner's Manual

JOBNAME: CHRY OM INTL (Conten PAGE: 15 SESS: 2 OUTPUT: Wed Aug 25 08:13:16 2010 SUM: 41EBB09F
/chry_pdm/chrysler/owners/wra/og

A WORD ABOUT YOUR KEYS

The keys for your new vehicle are enclosed in a
plastic bag with the key code number on it. If
you received your keys without the bag, ask
your authorized dealer to give you the number.
The key code can also be obtained by your
authorized dealer from your vehicle invoice.

Ignition Key Removal

1. Place the shift lever in PARK (if equipped
with an automatic transmission).
2. Turn the ignition switch to the ACC (ACCES-
SORY) position.
art=020232708.tif NO TRANS
Ignition Switch Positions
1 — LOCK 3 — ON/RUN
2 — ACC (ACCES- 4 — START
SORY)
3. Push the ignition key inward.
4. Turn the ignition key to the LOCK position,
and remove the key.
WARNING!
Leaving unattended children in a vehicle is
dangerous for a number of reasons. A child or
others could be injured. Children should be
warned not to touch the parking brake, brake
pedal, or the shift lever. Do not leave the key
in the ignition. A child could operate power
windows, other controls, or move the vehicle.
CAUTION!
An unlocked vehicle is an invitation to thieves.
Always remove the key from the ignition, and
lock all doors when leaving the vehicle unat-
tended.

Key-In-Ignition Reminder

Opening the driver's door when the key is in the
ignition, sounds a signal to remind you to
remove the key.
NOTE:
The Key-In-Ignition reminder only sounds
when the ignition key is placed in the LOCK
or ACC position.
13