Jeep 2010 Wrangler Owner's Manual page 61

JOBNAME: CHRY OM INTL (Conten PAGE: 61 SESS: 2 OUTPUT: Wed Aug 25 08:13:16 2010 SUM: 4820EE71
/chry_pdm/chrysler/owners/wra/og
saying "Setup" and then "Phone Pairing", the
following compound command can be said:
"Setup Phone Pairing."
• For each feature explanation in this section,
only the compound form of the voice com-
mand is given. You can also break the com-
mands into parts and say each part of the
command when you are asked for it. For
example, you can use the compound form
voice command "Phonebook New Entry", or
you can break the compound form com-
mand into two voice commands: "Phone-
book" and "New Entry." Please remember,
the Uconnect™ Phone works best when you
talk in a normal conversational tone, as if
speaking to someone sitting a few feet/
meters away from you.
Voice Command Tree
Refer to "Voice Tree."
Help Command
If you need assistance at any prompt, or if you
want to know your options at any prompt, say
"Help" following the beep. The Uconnect™
Phone will play all the options at any prompt if
you ask for help.
To activate the Uconnect™ Phone from idle,
simply press the button and follow the
audible prompts for directions. All Uconnect™
Phone sessions begin with a press of the
button on the radio control head.
Cancel Command
At any prompt, after the beep, you can say
"Cancel" and you will be returned to the main
menu. However, in a few instances the system
will take you back to the previous menu.
Pair (Link) Uconnect™ Phone to a Mobile
Phone
To begin using your Uconnect™ Phone, you
must pair your compatible Bluetooth enabled
mobile phone (refer to "Introduction" section to
learn about the phone type).
To complete the pairing process, you will need
to reference your mobile phone owner's
manual. The Uconnect™ website may also
provide detailed instructions for pairing.
The following are general phone to Uconnect™
Phone pairing instructions:
• Press the button to begin.
• After the "Ready" prompt and the following
beep, say "Setup Phone Pairing".
• When prompted, after the beep, say "Pair a
Phone" and follow the audible prompts.
• You will be asked to say a four-digit Personal
Identification Number (PIN), which you will
later need to enter into your mobile phone.
You can enter any four-digit PIN. You will not
need to remember this PIN after the initial
pairing process.
• For identification purposes, you will be
prompted to give the Uconnect™ Phone a
name for your mobile phone. Each mobile
phone that is paired should be given a
unique phone name.
• You will then be asked to give your mobile
phone a priority level between 1 and 7, with
1 being the highest priority. You can pair up
to seven mobile phones to your Uconnect™
Phone. However, at any given time, only one
mobile phone can be in use, connected to
your Uconnect™ System. The priority allows
the Uconnect™ Phone to know which mobile
phone to use if multiple mobile phones are in
the vehicle at the same time. For example, if
59