Fold And Tumble Rear Seat - Two Door Models - Jeep Wrangler Owner's Manual

WARNING!
The head restraints for all occupants must be
properly adjusted prior to operating the ve-
hicle or occupying a seat. Head restraints
should never be adjusted while the vehicle is
in motion. Driving a vehicle with the head
restraints improperly adjusted or removed
could cause serious injury or death in the
event of a collision.
Front Head Restraints
To raise the head restraint, pull upward on the
head restraint. To lower the head restraint,
press the adjustment button, located on the
base of the head restraint, and push downward
on the head restraint.
80
Adjustment Button
NOTE:
The rear head restraints are not adjustable.
To remove the head restraint, pull upward on
the head restraint to it's highest position, push
in both buttons at the base of each head
restraint rod, and simultaneously pull up on the
head restraint.
Rear Head Restraints
The rear seat is equipped with nonadjustable
head restraints. Refer to "Occupant Restraints"
in "Things to Know Before Starting Your Ve-
hicle" for information on child seat tether rout-
ing.
Fold and Tumble Rear Seat — Two
Door Models
NOTE:
• Prior to folding the rear seat, it may be
necessary to reposition the front seats.
• Be sure that the front seats are fully
upright and positioned forward. This will
allow the rear seat to fold down easily.
1. Lift the seatback release lever and fold the
seatback forward.
Rear Seat Release
2. Slowly flip the entire seat forward.