Jeep 2010 WK Grand Cherokee SRT8 Owner's Manual
Jeep 2010 WK Grand Cherokee SRT8 Owner's Manual

Jeep 2010 WK Grand Cherokee SRT8 Owner's Manual

Hide thumbs Also See for 2010 WK Grand Cherokee SRT8:
Table of Contents

Advertisement

Quick Links

SECTION
1

INTRODUCTION

2
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
4
UNDERSTANDING YOUR INSTRUMENT PANEL
5
STARTING AND OPERATING
6
WHAT TO DO IN EMERGENCIES
7
MAINTAINING YOUR VEHICLE
8
MAINTENANCE SCHEDULES
9
IF YOU NEED CONSUMER ASSISTANCE
10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 381
INDEX
TABLE OF CONTENTS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 307
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 353
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 371
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
PAGE
1
2
3
4
5
6
7
8
9
10

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2010 WK Grand Cherokee SRT8 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Jeep 2010 WK Grand Cherokee SRT8

  • Page 1: Introduction

    TABLE OF CONTENTS SECTION PAGE ............3 INTRODUCTION .
  • Page 3: Table Of Contents

    INTRODUCTION CONTENTS Introduction ......4 Warnings And Cautions ....7 Rollover Warning .
  • Page 4: Introduction

    4 INTRODUCTION INTRODUCTION When it comes to service, remember that your authorized Congratulations on selecting your new Chrysler Group dealer knows your vehicle best, has factory-trained tech- LLC vehicle. Be assured that it represents precision nicians and genuine Mopar parts, and cares about your workmanship, distinctive styling, and high quality - all satisfaction.
  • Page 5: How To Use This Manual

    INTRODUCTION 5 control. Failure to operate this vehicle safely may result belts could cut the highway death toll by 10,000 or more in an accident, rollover of the vehicle, and severe or fatal each year and could reduce disabling injuries by two injury.
  • Page 6 6 INTRODUCTION...
  • Page 7: Warnings And Cautions

    INTRODUCTION 7 WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against op- erating procedures that could result in an accident or bodily injury. It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information.
  • Page 8: Vehicle Modifications/Alterations

    8 INTRODUCTION VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
  • Page 9: Things To Know Before Starting Your Vehicle

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A Word About Your Keys ....12 Vehicle Security Alarm ....17 ▫...
  • Page 10 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Remote Open Window Feature — ▫ Power Windows ..... 28 If Equipped ......21 ▫...
  • Page 11 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Seat Belts And Pregnant Women ..43 Safety Tips ......70 ▫...
  • Page 12: A Word About Your Keys

    12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Your vehicle uses a keyless ignition system. This system consists of a Remote Keyless Entry (RKE) transmitter with integrated ignition key and a Wireless Ignition Node (WIN) with integral ignition switch. You can insert the double-sided key into the ignition switch with either side up.
  • Page 13: Integrated Ignition Key

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Integrated Ignition Key The integrated ignition key operates the ignition switch. It also contains the Remote Keyless Entry (RKE) trans- mitter and an emergency key, which stores in the rear of the RKE transmitter. The emergency key allows for entry into the vehicle should the battery in the vehicle or the RKE transmitter go dead.
  • Page 14 14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Settings (Customer-Programmable Features)” under • If you try to remove the key before you place the shift “Electronic Vehicle Information Center (EVIC)” in lever in PARK, it may become trapped temporarily in Section 4 of this manual.
  • Page 15: Key-In-Ignition Reminder

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 Key-In-Ignition Reminder the vehicle. The system will shut the engine off in two If you open the driver’s door with the integrated ignition seconds if an invalid RKE transmitter is used to start the key in the ignition, a chime will sound to remind you to engine.
  • Page 16: Replacement Keys

    16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The Sentry Key Immobilizer system is not At the time of purchase, the original owner is provided compatible with aftermarket remote starting systems. with a four-digit Personal Identification Number (PIN). Use of these systems may result in vehicle starting Keep the PIN in a secure location.
  • Page 17: General Information

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 General Information park lamps and/or turn signals will flash for an addi- The Sentry Key system complies with FCC rules Part 15 tional 15 minutes. and with RSS-210 of Industry Canada. Operation is NOTE: The Panic and Security alarms are quite differ- subject to the following conditions: ent.
  • Page 18: To Disarm The System

    18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Vehicle Security Light (located in the instrument cluster) transmitter, once the Vehicle Security Alarm is armed will flash rapidly for about 16 seconds to signal that the (after 16 seconds), when you pull the door handle to exit, Vehicle Security Alarm is arming.
  • Page 19: Remote Keyless Entry (Rke)

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 REMOTE KEYLESS ENTRY (RKE) This system allows you to lock or unlock the doors and liftgate, or activate the panic alarm, from distances up to approximately 66 ft (20 m) using a hand-held Remote Keyless Entry (RKE) transmitter.
  • Page 20 20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles equipped with the Electronic Vehicle Remote Key Unlock, Driver Door/All Doors First Press Information Center (EVIC), refer to “Flash Lamps with This feature lets you program the system to unlock either Lock,”...
  • Page 21: To Lock The Doors

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 To Lock the Doors To Release the Liftgate Flipper Glass Press and release the LOCK button on the RKE transmit- Press the FLIPPER GLASS/LIFTGATE RELEASE button ter to lock all doors. The turn signal lamps will flash and two times (the second press within five seconds of the the horn will chirp to acknowledge the signal.
  • Page 22: Using The Panic Alarm

    22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Using the Panic Alarm Programming Additional Transmitters To turn the Panic Alarm feature on or off, press and hold If you do not have a programmed RKE transmitter, the PANIC button on the RKE transmitter for at least one contact your authorized dealer for details.
  • Page 23: General Information

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 3. Reposition the access door panel over the battery opening and snap into place. General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: •...
  • Page 24: Remote Starting System - If Equipped

    24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. A weak battery in the RKE transmitter. The expected How to Use Remote Start life of the battery is a minimum of three years. All of the following conditions must be met before the engine will remote start: 2.
  • Page 25 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 NOTE: WARNING! • If an engine fault is present the vehicle will start and • Do not start or run an engine in a closed garage or then shut down 10 seconds later. confined area.
  • Page 26: Door Locks

    26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: To avoid unintentional shutdowns, the system DOOR LOCKS will disable the one time press of the REMOTE START Manual Door Locks button for two seconds after receiving a valid Remote Use the manual door lock plunger to lock the doors from Start request.
  • Page 27: Power Door Locks

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 Power Door Locks If you press the door lock switch while the keys are in the The power door lock switch is located on each front door ignition switch and the driver’s door is open, the doors panel.
  • Page 28: Child Protection Door Lock

    28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE This feature is selectable and can be turned on or off. Refer to “Auto Door Locks” under “Customer- Programmable Features” in the “Electronic Vehicle Infor- mation Center (EVIC),” in Section 4 of this manual, or see your authorized dealer.
  • Page 29 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 passenger/rear passenger door windows. The window Auto-Down controls will operate only when the ignition switch is in Both the driver and front passenger window switches the ON or ACCESSORY position. have an “Auto-Down” feature. Press the window switch past the first detent, release, and the window will go down automatically.
  • Page 30 30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To stop the window from going all the way up during the WARNING! Auto Up operation, push down on the switch briefly. There is no anti-pinch protection when the window To close the window part way, lift the window switch to is almost closed.
  • Page 31: Wind Buffeting

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 Window Lockout Button Wind Buffeting The Window Lockout button on the driver’s door allows Wind buffeting can be described as the perception of you to disable the window controls on the other doors. To pressure on the ears or a helicopter-type sound in the disable the window controls on the other doors, press the ears.
  • Page 32: Liftgate

    32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LIFTGATE WARNING! To open the liftgate, pull up (squeeze) on the handle and • Driving with the liftgate open can allow poison- lift. Manually unlocking the vehicle doors with the plunger or a key in the lock cylinder will not unlock the ous exhaust gases into your vehicle.
  • Page 33 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 Once the liftgate flipper glass has been opened, connec- tion to the rear window wiper is interrupted, preventing activation of the rear wiper blade while the flipper glass is open. NOTE: If a malfunction to the liftgate latch should occur, an emergency liftgate latch release can be used to open the liftgate.
  • Page 34: Occupant Restraints

    34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Knee bolsters/blockers for front seat occupants OCCUPANT RESTRAINTS Some of the most important safety features in your • Front seat belts incorporate pretensioners to enhance vehicle are the restraint systems: occupant protection by managing occupant energy •...
  • Page 35: Lap/Shoulder Belts

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 Research has shown that seat belts save lives, and they WARNING! can reduce the seriousness of injuries in a collision. Some of the worst injuries happen when people are thrown In a collision, you and your passengers can suffer from the vehicle.
  • Page 36: Lap/Shoulder Belt Operating Instructions

    36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • Two people should never be belted into a single • It is extremely dangerous to ride in a cargo area, seat belt. People belted together can crash into one inside or outside of a vehicle.
  • Page 37 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 2. The seat belt latch plate is above the back of your seat. 3. When the belt is long enough to fit, insert the latch Grasp the latch plate and pull out the belt. Slide the latch plate into the buckle until you hear a “click.”...
  • Page 38 38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • A belt that is worn under your arm is very danger- • A belt that is buckled into the wrong buckle will ous. Your body could strike the inside surfaces of not protect you properly.
  • Page 39 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 4. Position the lap belt across your thighs, below your 5. Position the shoulder belt on your chest so that it is abdomen. To remove slack in the lap portion, pull up a comfortable and not resting on your neck.
  • Page 40: Adjustable Upper Shoulder Belt Anchorage

    40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically, checking for cuts, frays, or loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system.
  • Page 41: Energy Management Feature

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 Energy Management Feature Automatic Locking Mode — If Equipped This vehicle has a safety belt system with an Energy In this mode, the shoulder belt is automatically pre- Management feature in the front seating positions to help locked.
  • Page 42: Seat Belt Pretensioners - If Equipped

    42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How to Disengage the Automatic Locking Mode The pretensioners are triggered by the Occupant Re- Disconnect the combination lap/shoulder belt and allow straint Controller (ORC). Like the airbags, the pretension- it to retract completely to disengage the Automatic ers are single use items.
  • Page 43: Seat Belts And Pregnant Women

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 BeltAlert can be enabled or disabled by your authorized 4. Turn the ignition key to the OFF position. A single dealer or by following these steps: chime will sound to signify that you have successfully completed the programming.
  • Page 44: Seat Belt Extender

    44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belt Extender Supplemental Restraint Systems (SRS) If a seat belt is too short, even when fully extended and This vehicle has airbags for both the driver and front when the adjustable upper shoulder belt anchorage (if passenger as a supplement to the seat belt restraint equipped) is in its lowest position, your authorized systems.
  • Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 The Advanced Front Airbags have a multistage inflator design. This allows the airbag to have different rates of inflation based on the severity and type of collision. This vehicle may also be equipped with Supplemental Side Airbag Inflatable Curtains (SABIC) to protect the driver, front, and rear passengers sitting next to a win- dow.
  • Page 46: Advanced Front Airbag Features

    46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Front Passenger Airbag The first stage inflator is triggered immediately during an impact that requires airbag deployment. The timing of • Front and Side Impact Sensors the second stage determines whether the output force is •...
  • Page 47 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 Supplemental Side Airbag Inflatable Curtain (SABIC) — If Equipped SABIC airbags offer side-impact and vehicle rollover protection to front and rear seat outboard occupants in addition to that provided by the body structure. Each airbag features inflated chambers placed adjacent to the head of each outboard occupant that reduce the potential for side-impact head injuries.
  • Page 48 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Airbag covers may not be obvious in the interior trim; Along with seat belts and pretensioners, Advanced Front but they will open during airbag deployment. Airbags work with the knee bolsters to provide improved The system includes sensors adjacent to both front and protection for the driver and front passenger.
  • Page 49 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 You should read the instructions provided with your WARNING! child restraint to make sure that you are using it properly. Infants in rear-facing child restraints should NEVER All occupants should ALWAYS wear their lap and shoul- ride in the front seat of a vehicle with a passenger der belts properly.
  • Page 50: Airbag Deployment Sensors And Controls

    50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Airbag Deployment Sensors and Controls WARNING! Occupant Restraint Controller (ORC) • Relying on the airbags alone could lead to more The ORC is part of a Federally regulated safety system severe injuries in a collision. The airbags work required for this vehicle.
  • Page 51 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 The Advanced Front Airbags will not deploy in all frontal The ORC monitors the readiness of the electronic parts of collisions, including some that may produce substantial the system whenever the ignition switch is in the START vehicle damage —...
  • Page 52 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE It also includes diagnostics that will illuminate the instru- the Advanced Front Airbags. Different airbag inflation ment cluster Airbag Warning Light if a malfunction is rates are possible, based on the collision type and sever- noted.
  • Page 53 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 deploy the SABIC Airbags, depending on severity and Front and Side Impact Sensors type of collision. In these events, the ORC will deploy the In front and side impacts, impact sensors aid the ORC in SABIC only on the impact side of the vehicle.
  • Page 54 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Turn on the interior lights, which remain on as long as floor. They are not caused by contact with chemicals. the battery has power or until the ignition key is They are not permanent and normally heal quickly. removed.
  • Page 55 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 Maintaining Your Airbag System WARNING! WARNING! Deployed airbags and seat belt pretensioners cannot protect you in another collision. Have the airbags, • Modifications to any part of the airbag system seat belt pretensioners, and the front passenger seat could cause it to fail when you need it.
  • Page 56 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Airbag Warning Light WARNING! (Continued) You will want to have the airbags ready to • Do not attempt to modify any part of your ad- inflate for your protection in a collision. While vanced airbag system.
  • Page 57: Event Data Recorder (Edr)

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 NOTE: If the speedometer, tachometer, or any engine NOTE: related gauges are not working, the Occupant Restraint 1. A near-deployment event occurs when the airbag Controller (ORC) may also be disabled. The airbags may sensor detects severe vehicle deceleration usually indica- not be ready to inflate for your protection.
  • Page 58 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE In the event that an investigation is undertaken by 1. Used for research purposes, such as to match data Chrysler Group LLC (regardless of initiative), the com- with a particular crash record in an aggregate database, pany or its designated representative will first obtain provided confidentiality of personal data is thereafter permission of the appropriate custodial entity for the...
  • Page 59: Child Restraints

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 • Pedal position seat Owner’s Manual to ensure you have the right seat for your child. Use the restraint that is correct for your • And other parameters depending vehicle child. configuration WARNING! Child Restraints Everyone in your vehicle needs to be buckled up all the...
  • Page 60 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Infants and Child Restraints WARNING! • Safety experts recommend that children ride • Rearward-facing child seats must NEVER be used rearward-facing in the vehicle until they are at least in the front seat of a vehicle with the front passen- one year old and weigh at least 20 lbs (9 kg).
  • Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 Here are some tips for getting the most out of your child designed to keep the lap portion tight around the child restraint: restraint so that it is not necessary to use a locking clip. If the seat belt has a cinching latch plate, pulling up on •...
  • Page 62 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • In the rear seat, you may have trouble tightening the Do not leave it loose in the vehicle. In a sudden stop or lap/shoulder belt on the child restraint because the collision, it could strike the occupants or seatbacks and buckle or latch plate is too close to the belt path cause serious personal injury.
  • Page 63 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 • Check belt fit periodically. A child’s squirming or The belt-positioning booster seat is for children weighing more than 40 lbs (18 kg), but who are still too small to fit slouching can move the belt out of position. the vehicle’s seat belts properly.
  • Page 64 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH-compatible child restraint systems are now avail- All three rear seating positions have lower anchorages able. However, because the lower anchorages are to be that are capable of accommodating LATCH-compatible introduced over a period of years, child restraint systems child seats having flexible, webbing-mounted lower at- having attachments for those anchorages will continue to tachments.
  • Page 65 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 Installing the LATCH-Compatible Child Restraint System We urge you to carefully follow the directions of the manufacturer when installing your child restraint. Not all child restraint systems will be installed as described here. Again, carefully follow the installation instructions that were provided with the child restraint system.
  • Page 66 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE In addition, there are tether strap anchorages behind each means of adjusting the tension in the strap. Forward- rear seating position located on the back of the seat. facing toddler restraints and some rear-facing infant restraints will also be equipped with a tether strap, a hook for attachment to the tether strap anchorage and a means of adjusting the tension of the strap.
  • Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 For seat belts having an Automatic Locking Retractor WARNING! (ALR), pull the belt from the retractor until there is enough allowance to pass it through the child restraint Improper installation of a child restraint to the and slide the latch plate into the buckle.
  • Page 68 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the belt still can’t be tightened, or if pulling and WARNING! pushing on the restraint loosens the belt, you may need to do something more. Disconnect the latch plate from Always remove the subwoofer from the vehicle the buckle, turn the buckle around, and insert the latch whenever the tether anchors behind the subwoofer plate into the buckle again.
  • Page 69 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 WARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap.
  • Page 70: Engine Break-In Recommendations

    70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ENGINE BREAK-IN RECOMMENDATIONS A new engine may consume some oil during its first few A long break-in period is not required for the engine in thousand miles (kilometers) of operation. This should be your vehicle.
  • Page 71: Exhaust Gas

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 Do not run the engine in a closed garage or in confined WARNING! (Continued) areas any longer than needed to move your vehicle in or • Do not allow people to ride in any area of your out of the area.
  • Page 72: Safety Checks You Should Make Inside The Vehicle

    72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Whenever a change is noticed in the sound of the exhaust Front seat belt assemblies must be replaced after a system, when exhaust fumes can be detected inside the collision. Rear seat belt assemblies must be replaced after vehicle, or when the underside or rear of the vehicle is a collision if they have been damaged (i.e., bent retractor, damaged, have a competent mechanic inspect the com-...
  • Page 73: Periodic Safety Checks You Should Make Outside The Vehicle

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 Periodic Safety Checks You Should Make Outside Door Latches the Vehicle Check for positive closing, latching, and locking. Tires Fluid Leaks Examine tires for excessive tread wear and uneven wear Check area under vehicle after overnight parking for fuel, patterns.
  • Page 75: Understanding The Features Of Your Vehicle

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS Mirrors ......80 uconnect™ phone — If Equipped .
  • Page 76 76 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Head Restraints ▫ Multifunction Lever ..... 87 ....100 ▫...
  • Page 77 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 77 ▫ Lane Change Assist ....106 Adjustable Pedals — If Equipped ..114 ▫...
  • Page 78 78 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Cleaning The Rear Park Assist ▫ Reprogramming A Single HomeLink ..122 Button ......133 ▫...
  • Page 79 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 79 ▫ Sunroof Maintenance ▫ Rear Storage Compartment ....136 ... . 143 ▫...
  • Page 80: Mirrors

    80 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Automatic Dimming Mirror This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light next to the button will illuminate to indicate when the dimming feature is activated.
  • Page 81: Outside Mirrors

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 81 Outside Mirrors Outside Automatic Dimming Mirrors — If To receive maximum benefit, adjust the outside mirrors Equipped to center on the adjacent lane of traffic with a slight The driver and passenger outside mirrors will automati- overlap of the view obtained on the inside mirror.
  • Page 82: Heated Mirrors - If Equipped

    82 UNDERSTANDING THE FEATURES OF YOUR VEHICLE After selecting a mirror, move the knob in the same Heated Mirrors — If Equipped direction you want the mirror to move. Use the off These mirrors are heated to melt frost or ice. This (center) position to guard against accidentally moving a feature is activated whenever you turn on the rear mirror position.
  • Page 83: Uconnect™ Phone - If Equipped

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 83 VOICE RECOGNITION (VR) SYSTEM — IF EQUIPPED Refer to “Voice Recognition (VR)” in the uconnect™ User Manual located on the DVD for further details. SEATS Seats are a primary part of the Occupant Restraint System of the vehicle.
  • Page 84: Front Manual Seat Adjustment

    84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Front Manual Seat Adjustment Front Seat Adjustment — Recline Move the seat forward or rearward using the adjustment To adjust the seatback, lift the lever located on the bar. Lift up on the bar located on the front of the seat near outboard side of the seat, lean back and release the lever the floor.
  • Page 85: Manual Lumbar Support Adjustment

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 85 Manual Lumbar Support Adjustment Eight-Way Driver’s Power Seat The manual lumbar support adjustment lever is located The driver’s power seat switches are located on the on the right side of the driver’s seatback (all models) and outboard side of the driver’s seat.
  • Page 86: Four-Way Passenger's Power Seat - If Equipped

    86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The four-way seat does not have an up/down WARNING! adjustment. Adjusting a seat while the vehicle is moving is WARNING! dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be Adjusting a seat while the vehicle is moving is properly adjusted and you could be injured.
  • Page 87: Head Restraints

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 87 Head Restraints WARNING! Head restraints can reduce the risk of injury in the event of a rear impact. Adjustable head restraints should be Driving a vehicle with the head restraints removed or adjusted so that the upper edge is as high as practical. improperly adjusted could cause serious injury or The head restraints have a locking button which must be death in the event of a collision.
  • Page 88 88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE After turning the ignition ON, you can choose from High, two to one, indicating the change. The Low-level setting Low or Off heat settings. Amber indicator lights in each will turn Off automatically after approximately 30 min- switch indicate the level of heat in use.
  • Page 89: Rear Heated Seats - If Equipped

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89 WARNING! (Continued) • Do not place anything on the seat that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. To avoid heated seat surfaces coming in contact with each other and potential seat overheating, ALWAYS ensure that the seat heater is in the Off position (amber lights indicate High/Low/Off) before plac-...
  • Page 90 90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press the switch once to select High-level heat- WARNING! ing. Press the switch a second time to select • Persons who are unable to feel pain to the skin Low-level heating. Press the switch a third time to shut the heating elements Off.
  • Page 91: 60/40 Split Rear Seat

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 60/40 Split Rear Seat To Lower Rear Seat Either side of the rear seat can be lowered to allow for extended cargo space and still maintain some rear seating room. NOTE: Be sure that the front seats are fully upright and positioned forward.
  • Page 92 92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Fold the rear seat completely forward. To Raise Rear Seat Raise the rear seatback and lock it into place. If interfer- ence from the cargo area prevents the seatback from fully locking, you will have difficulty returning the seat to its proper position.
  • Page 93 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 Storage (Rear Seat Armrest) — If Equipped Press the latch and lift the top of the armrest to access the The rear seat may be equipped with a center storage storage bin. armrest. Armrest Storage Latch Rear Seat Armrest...
  • Page 94: Driver Memory Seat - If Equipped

    94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE DRIVER MEMORY SEAT — IF EQUIPPED Once programmed, the memory buttons 1 and 2 on the driver’s door panel can be used to recall the driver’s seat, driver’s outside mirror, adjustable brake and accelerator pedals and radio station preset settings.
  • Page 95: Setting Memory Positions And Linking Remote Keyless Entry Transmitter To Memory

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 Setting Memory Positions and Linking Remote 5. Turn on the radio and set the radio station presets (up Keyless Entry Transmitter to Memory to 12 AM and 12 FM stations can be set). NOTE: Each time the S (SET) button and a numbered 6.
  • Page 96: Memory Position Recall

    96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 11. Select Remote Linked to Memory in the Electronic To recall the memory setting for driver two, press Vehicle Information Center (EVIC) and enter Yes . Refer MEMORY button number 2 on the driver’s door, or the to “Electronic Vehicle Information Center (EVIC) —...
  • Page 97: Easy Entry/Exit Seat

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 3. Press and release the memory S (SET) button located There are two possible Easy Entry/Exit adjustments on the driver’s door. available: • The seat cushion will move rearward approximately 4. Within five seconds, press and release MEMORY button 1 on the driver’s door.
  • Page 98: To Open And Close The Hood

    98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Easy Entry/Exit feature will be automatically dis- TO OPEN AND CLOSE THE HOOD abled if the seat is already positioned closer than 0.9 in Two latches must be released to open the hood. (23 mm) forward of the rear stop.
  • Page 99 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 2. Reach under the hood, move safety latch to the left CAUTION! and lift the hood. To prevent possible damage, do not slam the hood to close it. Use a firm downward push at the center of the hood to ensure that both latches engage.
  • Page 100: Lights

    100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE LIGHTS Headlights and Parking Lights Turn the end of the multifunction lever to the first detent Multifunction Lever for parking light operation. Turn to the second detent for The multifunction lever controls the operation of the headlight operation.
  • Page 101: Automatic Headlight System - If Equipped

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 Automatic Headlight System — If Equipped Headlights On Automatically With Wipers Turn the end of the multifunction lever to the third detent If your vehicle is equipped with Automatic Headlights, it (AUTO) to activate the Automatic Headlight system. also has this customer-programmable feature.
  • Page 102: Smartbeam™ - If Equipped

    102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: When your headlights come on during the To Activate daytime, the instrument panel lights will automatically 1. Select “Auto High Beams.” Refer to “Electronic Ve- dim to the lower nighttime intensity. Refer to “Instru- hicle Information Center...
  • Page 103: Daytime Running Lights - If Equipped

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 NOTE: Broken, muddy, or obstructed headlights and Automatic Headlight Leveling — HID Headlights taillights of vehicles in the field of view will cause Only headlights to remain on longer (closer to the vehicle). This feature prevents the headlights from interfering Also, dirt, film, and other obstructions (sticker, toll box, with the vision of oncoming drivers.
  • Page 104: Battery Saver Feature

    104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE even when the doors and liftgate are open. While in the Battery Saver Feature “Off” position the instrument panel lighting is at the If the multifunction lever is left in the interior light lowest light level and may not be suitable for night position, parking light position, or the headlight position driving.
  • Page 105: Fog Lights - If Equipped

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 Fog Lights — If Equipped NOTE: • Turning on the high beam headlights turns off the fog The fog light switch is located in the multifunction lever. To activate the fog lights, turn on the park/ lights.
  • Page 106: Turn Signals

    106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn Signals NOTE: If either light remains on and does not flash, or Move the multifunction lever up or down and the arrows there is a very fast flash rate, check for a defective outside on each side of the instrument cluster flash to show light bulb.
  • Page 107: Headlight Time Delay

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 Headlight Time Delay Interior Lights This feature delays turning off the headlights for 30, 60 or The interior lighting consists of courtesy lights (below the 90 seconds after the ignition switch is turned OFF. To instrument panel), an overhead console light (which activate the headlight delay, the multifunction lever must contains both driver and passenger reading lights), read-...
  • Page 108: Front Map/Reading Lights

    108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Front Map/Reading Lights These lights are mounted in the overhead console. Each light can be turned on by pressing the recessed area of the lens. To turn these lights off, press the recessed area of the lens a second time.
  • Page 109: Windshield Wipers And Washers

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 WINDSHIELD WIPERS AND WASHERS Windshield Wiper Operation The windshield wiper/washer control lever is located on Rotate the end of the lever upward to the LO position for the right side of the steering column. The front wipers are low-speed wiper operation.
  • Page 110: Windshield Washer Operation

    110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! WARNING! Always remove any buildup of snow that prevents Sudden loss of visibility through the windshield the windshield wiper blades from returning to the could lead to an accident. You might not see other “park”...
  • Page 111: Intermittent Wiper System

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 delay interval. The delay can be regulated from a maxi- mum of approximately 18 seconds between cycles, to a cycle every 1/2 second. Mist Control Intermittent Wiper System Use one of the five intermittent wiper speeds when weather conditions make a single wiping cycle, with a Front Wiper Control variable pause between cycles, desirable.
  • Page 112: Rain Sensing Wipers - If Equipped

    112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rain Sensing Wipers — If Equipped NOTE: • The Rain Sensing feature will not operate when the This feature senses moisture on the windshield and automatically activates the wipers for the driver. The wiper switch is in the low or high-speed position.
  • Page 113: Tilt/Telescoping Steering Column

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 The Rain Sensing system has protection features for the TILT/TELESCOPING STEERING COLUMN wiper blades and arms, and will not operate under the This feature allows you to tilt the steering column following conditions: upward or downward.
  • Page 114: Adjustable Pedals - If Equipped

    114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To unlock the steering column, push the control handle improved position with the steering wheel. The adjust- downward (toward the floor). To tilt the steering column, able pedal system is designed to allow a greater range of move the steering wheel upward or downward as de- driver comfort for steering wheel tilt and seat position.
  • Page 115: Electronic Speed Control - If Equipped

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 Press the bottom of the switch to move the pedals CAUTION! forward (away from the driver). Do not place any article under the adjustable pedal’s Press the top of the switch to move the pedals rearward or impede its ability to move as it may cause damage (toward the driver).
  • Page 116: To Activate

    116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Electronic Speed Control lever is located on the right simultaneously. If this occurs, the Electronic Speed Con- side of the steering wheel. trol System can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed.
  • Page 117: To Set A Desired Speed

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 To Set a Desired Speed To Vary the Speed Setting When the vehicle has reached the desired speed, press When the Electronic Speed Control is on, the vehicle down on the lever and release. Release the accelerator speed can be increased by pushing up and holding and the vehicle will operate at the selected speed.
  • Page 118: To Accelerate For Passing

    118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Accelerate for Passing Section and Note Section for limitations of this system Press the accelerator as you would normally. When the and recommendations. pedal is released, the vehicle will return to the set speed. The Rear Park Assist will remember the last system state Using Electronic Speed Control On Hills (enabled or disabled) from the last ignition cycle when...
  • Page 119: Rear Park Assist Warning Display

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 The sensors can detect obstacles from approximately 12 to 59 in (30 to 150 cm) from the rear fascia in the horizontal direction, depending on the location and orientation of the obstacle and the type of obstacle. Rear Park Assist Warning Display The Rear Park Assist Warning Display, located in the headliner near the flipper glass, provides both visible and...
  • Page 120 120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The system dimly illuminates the two outer most yellow LEDs when it is ON and detecting no obstacles. The following chart shows the warning display operation when the system is detecting an obstacle: WARNING DISPLAY DISTANCES DISPLAY LED OBSTACLE DISTANCE FROM:...
  • Page 121: Enable/Disable The Rear Park Assist

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 Enable/Disable The Rear Park Assist The Rear Park Assist Switch LED will be ON when the The Rear Park Assist can be enabled and disabled with a Rear Park Assist is disabled or defective. The Rear Park switch located on the upper switch bank of the instru- Assist Switch LED will be OFF when the system is ment panel.
  • Page 122: System Usage Precautions

    122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When you move the shift lever to the REVERSE Cleaning The Rear Park Assist Clean the Rear Park Assist Sensors with water, car wash position and the Rear Park Assist System is turned off, soap and a soft cloth.
  • Page 123 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 • Clean the Rear Park Assist Sensors regularly, taking CAUTION! care not to scratch or damage them. The sensors must • The Rear Park Assist System is only a parking aid not be covered with ice, snow, slush, mud, dirt, or debris.
  • Page 124 124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! (Continued) • Before using the Rear Park Assist System, it is • Drivers must be careful when backing up even strongly recommended that the ball mount and when using the Rear Park Assist System. Always hitch ball assembly is disconnected from the ve- check carefully behind your vehicle, look behind hicle when the vehicle is not used for towing.
  • Page 125: Rear Camera - If Equipped

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 REAR CAMERA — IF EQUIPPED CAUTION! Vehicles may be equipped with a rearview camera (lo- • To avoid vehicle damage, the Rear Camera system cated on the rear liftgate) that allows you to see an on-screen image (on the Navigation/Multimedia radio) should only be used as a parking aid.
  • Page 126: Turning The Rear Camera On Or Off - With Navigation Radio

    126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turning the Rear Camera On or Off — With Turning the Rear Camera On or Off — Without Navigation Radio Navigation Radio 1. Press the menu hard key. 1. Press the menu hard key. 2.
  • Page 127: Overhead Console

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 OVERHEAD CONSOLE Courtesy/Reading Lights The overhead console contains courtesy/reading lights, At the forward end of the console are two courtesy/ storage for sunglasses. Universal Garage Door Opener reading lights. (HomeLink ) and power sunroof switches may also be included, if equipped.
  • Page 128: Garage Door Opener - If Equipped

    128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE GARAGE DOOR OPENER — IF EQUIPPED HomeLink replaces up to three remote controls (hand- held transmitters) that operate devices such as garage door openers, motorized gates, lighting or home security systems. The HomeLink unit operates off your vehicle’s battery.
  • Page 129: Programming Homelink

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 Programming HomeLink WARNING! Before You Begin • Your motorized door or gate will open and close If you have not trained any of the HomeLink buttons, while you are training the Universal Transceiver. erase all channels before you begin training.
  • Page 130 130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) NOTE: Some gate operators and garage door openers from the HomeLink buttons while keeping the EVIC may require you to replace Step 3 with procedures noted display in view.
  • Page 131 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 This can usually be found where the hanging antenna 6. Firmly press and release the “LEARN” or “TRAIN- wire is attached to the garage door opener motor (it is ING” button. The name and color of the button may vary NOT the button normally used to open and close the by manufacturer.
  • Page 132: Gate Operator/Canadian Programming

    132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Gate Operator/Canadian Programming has successfully accepted the frequency signal. The Canadian radio-frequency laws require transmitter sig- EVIC display will change from “CHANNEL # TRAIN- nals to “time-out” (or quit) after several seconds of ING”...
  • Page 133: Reprogramming A Single Homelink Button

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 Reprogramming A Single HomeLink Button The HomeLink Universal Transceiver is disabled when To reprogram a channel that has been previously trained, the Vehicle Security Alarm is active. follow these steps: Troubleshooting Tips 1. Turn the ignition switch to the ON/RUN position. If you are having trouble programming HomeLink , here are some of the most common solutions: 2.
  • Page 134: General Information

    134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information POWER SUNROOF — IF EQUIPPED This device complies with FCC rules Part 15 and Industry The power sunroof switch is located between the sun Canada RSS-210. Operation is subject to the following visors on the overhead console.
  • Page 135: Opening Sunroof - Express

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 Opening Sunroof — Express WARNING! Press the switch rearward and release, and the sunroof • Never leave children in a vehicle with the key in will open automatically from any position. The sunroof will open fully, then stop automatically.
  • Page 136: Pinch Protect Override

    136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pinch Protect Override NOTE: The sunshade cannot be closed if the sunroof is If a known obstruction (ice, debris, etc.) prevents closing open. the sunroof, press the switch forward and hold for two Wind Buffeting seconds after the reversal occurs.
  • Page 137: Ignition Off Operation

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 Ignition OFF Operation NOTE: • Do not exceed the maximum power of 160 Watts (13 The power sunroof switches remain active for up ap- proximately ten minutes after the ignition switch has Amps) at 12 Volts for either of these outlets. been turned OFF.
  • Page 138 138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The front power outlets are located to the left and right of The power outlet located on the left side of the tray can the convenience tray (lower center of instrument panel). be used to power a conventional cigar lighter. Pull lightly on the tab of the plastic cover to access these The rear power outlet (if equipped) is located in the left power outlets.
  • Page 139 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 WARNING! CAUTION! • Many accessories that can be plugged in draw To avoid serious injury or death: • Do not insert any objects into the receptacles. power from the vehicle’s battery, even when not in •...
  • Page 140: Power Inverter - If Equipped

    140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER INVERTER — IF EQUIPPED There is a 115 Volt, 150 Watt inverter outlet located on the back of the center console to convert DC current to AC current. This outlet can power cellular phones, electron- ics and other low power devices requiring power up to 150 Watts.
  • Page 141 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 The power inverter is designed with built-in overload protection. If the power rating of 150 Watts is exceeded, the power inverter will automatically shut down. Once the electrical device has been removed from the outlet the inverter should automatically reset.
  • Page 142: Cupholders

    142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUPHOLDERS WARNING! There are two cupholders for the front seat passengers located in the center console. To avoid serious injury or death: • Do not use a three-prong adaptor. • Do not insert any objects into the receptacles. •...
  • Page 143: Cargo Area Features

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 the cargo light lens surface will turn off all interior lights. Push on the lens surface a second time to restore the interior lights to normal operation. Rear Storage Compartment The rear storage compartment is located on the driver’s side behind the second row seat.
  • Page 144: Retractable Cargo Area Cover - If Equipped

    144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Retractable Cargo Area Cover — If Equipped NOTE: The purpose of this cover is for privacy, not to secure loads. It will not prevent cargo from shifting or protect passengers from loose cargo. To cover the cargo area: 1.
  • Page 145: Cargo Tie-Down Hooks

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 Cargo Tie-Down Hooks WARNING! The cargo tie-downs, located on the cargo area floor, should be used to safely secure loads when the vehicle is In an accident, a loose cargo cover in the vehicle moving.
  • Page 146 146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! (Continued) • Do not carry loads which exceed the load limits • To help protect against personal injury, passengers described on the label attached to the left door or should not be seated in the rear cargo area. The left door center pillar.
  • Page 147: Cargo Load Floor

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 Cargo Load Floor The cargo load floor is held by spring loaded latches. In order to use the cargo load floor, use the following The panel in the load floor is reversible for added utility. procedure: One side is carpeted and the other side features a plastic lined tray which holds a variety of items.
  • Page 148: Rear Window Features

    148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR WINDOW FEATURES Rotate the switch upward to the “On” position to activate the rear wiper. Rear Window Wiper/Washer NOTE: The rear wiper operates in an intermittent mode The rear wiper/washer is controlled by a rotary switch only.
  • Page 149: Rear Window Defroster

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 If the liftgate flipper glass is open, connection to the rear CAUTION! window wiper is interrupted preventing activation of the rear wiper blade. When the liftgate flipper glass is closed, Failure to follow these cautions can cause damage to the rear wiper switch, or the ignition switch, needs to be the heating elements: turned OFF and ON to restart the rear wiper.
  • Page 151: Understanding Your Instrument Panel

    UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS ▫ Driver-Selectable Surround Sound (DSS) – Instrument Panel Features ....154 If Equipped ......178 Instrument Cluster .
  • Page 152 152 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Clock Setting Procedure ▫ List Button (CD Mode For MP3 Play) ....184 ..207 ▫ Info Button (CD Mode For MP3 Play) Sales Code RES —...
  • Page 153 UNDERSTANDING YOUR INSTRUMENT PANEL 153 ▫ Electronic Serial Number/Sirius Video Entertainment System™ Identification Number (ESN/SID) ..214 (Sales Code XRV) — If Equipped ... 221 ▫...
  • Page 154: Instrument Panel Features

    154 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 — Air Outlet 5 — Upper Switch Bank 9 — Lower Switch Bank 2 — Instrument Cluster 6 — Power Outlet/Cigar Lighter 10 — Climate Controls 3 — Radio 7 — Storage Bin 11 —...
  • Page 155: Instrument Cluster

    UNDERSTANDING YOUR INSTRUMENT PANEL 155 INSTRUMENT CLUSTER...
  • Page 156: Instrument Cluster Description

    156 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTION the brake booster, the ABS pump will run when applying the brake and a brake pedal pulsation may be felt during 1. Speedometer each stop. Indicates vehicle speed. The dual brake system provides a reserve braking capac- 2.
  • Page 157 UNDERSTANDING YOUR INSTRUMENT PANEL 157 The light also will turn on when the parking brake is WARNING! applied with the ignition switch in the ON position. Driving a vehicle with the red brake light on is NOTE: This light shows only that the parking brake is dangerous.
  • Page 158 158 UNDERSTANDING YOUR INSTRUMENT PANEL 5. Malfunction Indicator Light (MIL) CAUTION! The Malfunction Indicator Light (MIL) is part of an onboard diagnostic system called OBD II that Prolonged driving with the MIL on could cause monitors engine and automatic transmission con- damage to the engine control system.
  • Page 159 UNDERSTANDING YOUR INSTRUMENT PANEL 159 6. Airbag Warning Light If the ABS Warning Light is on, the brake system should This light turns on and remains on for six to be serviced as soon as possible to restore the benefits of eight seconds as a bulb check when the ignition anti-lock brakes.
  • Page 160 160 UNDERSTANDING YOUR INSTRUMENT PANEL 10. Oil Pressure Warning Light 12. Tire Pressure Monitoring Telltale Light This light indicates low engine oil pressure. The Each tire, including the spare (if provided), light should turn on momentarily when the engine should be checked monthly, when cold and is started.
  • Page 161 UNDERSTANDING YOUR INSTRUMENT PANEL 161 Please note that the TPMS is not a substitute for proper When the malfunction indicator is illuminated, the sys- tire maintenance, and it is the driver’s responsibility to tem may not be able to detect or signal low tire pressure maintain correct tire pressure, even if under-inflation has as intended.
  • Page 162 162 UNDERSTANDING YOUR INSTRUMENT PANEL The gauge pointer will likely indicate a higher tempera- CAUTION! ture when driving in hot weather, up mountain grades, or when towing a trailer. It should not be allowed to The TPMS has been optimized for the original exceed the upper limits of the normal operating range.
  • Page 163 UNDERSTANDING YOUR INSTRUMENT PANEL 163 15. Electronic Stability Program (ESP) Warning WARNING! Light/Brake Assist System (BAS) Warning Light — If Equipped A hot engine cooling system is dangerous. You or The malfunction light for the Electronic Stabil- others could be badly burned by steam or boiling ity Program (ESP) is combined with Brake coolant.
  • Page 164 164 UNDERSTANDING YOUR INSTRUMENT PANEL 17. Cruise Indicator WARNING! This indicator illuminates when the speed con- trol system is turned ON. If a warning light remains on the system may not be working and you will not have the benefit of ESP or 18.
  • Page 165 UNDERSTANDING YOUR INSTRUMENT PANEL 165 19. Shift Lever Indicator 21. Electronic Throttle Control (ETC) Warning Light The Shift Lever Indicator is self-contained within the This light informs you of a problem with the instrument cluster. It displays the gear position of the Electronic Throttle Control (ETC) system.
  • Page 166 166 UNDERSTANDING YOUR INSTRUMENT PANEL 22. Front Fog Light Indicator — If Equipped If jump starting is required, refer to “Jump Starting This indicator will illuminate when the front fog Procedures” in section 6 of this manual. lights are on. 24.
  • Page 167: Electronic Vehicle Information Center (Evic)

    UNDERSTANDING YOUR INSTRUMENT PANEL 167 ELECTRONIC VEHICLE INFORMATION CENTER The EVIC consists of the following: (EVIC) • System Status The Electronic Vehicle Information Center (EVIC) fea- • Vehicle Information Warning Message Displays tures a driver-interactive display that is located in the instrument cluster.
  • Page 168: Electronic Vehicle Information Center (Evic) Displays

    168 UNDERSTANDING YOUR INSTRUMENT PANEL The system allows the driver to select information by COMPASS/TEMPERATURE Button pressing the following buttons mounted on the steering Press release COMPASS/ wheel: TEMPERATURE button to display one of eight compass readings and the outside temperature. MENU Button Press and release the MENU button and the Electronic Vehicle Information Center (EVIC)
  • Page 169 UNDERSTANDING YOUR INSTRUMENT PANEL 169 • KEY NOT PROGRAMMED — EXCEEDED KEY PRO- • HOOD/DOORS OPEN (with graphic) GRAM LIMIT • LIFTGATE/HOOD OPEN (with graphic) • PROGRAMMING ACTIVE — NEW KEY PRO- • HOOD/GLASS/DOOR OPEN (with graphic) GRAMMED • HOOD/GLASS/DOORS OPEN (with graphic) •...
  • Page 170 170 UNDERSTANDING YOUR INSTRUMENT PANEL • AUTO HIGH BEAMS ON • MEMORY SYSTEM DISABLED — SEATBELT BUCK- LED (with graphic) • AUTO HIGH BEAMS OFF • MEMORY SYSTEM DISABLED — VEHICLE NOT IN • PARK ASSIST DISABLED PARK • SERVICE SUSPENSION •...
  • Page 171 UNDERSTANDING YOUR INSTRUMENT PANEL 171 • LEFT REAR LOW PRESSURE (Premium TPM System • 1/8 Mile (if equipped with Performance Pages) Only) • 1/4 Mile (if equipped with Performance Pages) • RIGHT REAR LOW PRESSURE (Premium TPM Sys- • Instantaneous G-Force (if equipped with Performance tem Only) Pages) •...
  • Page 172: Trip Functions

    172 UNDERSTANDING YOUR INSTRUMENT PANEL Trip Functions The Trip Functions mode displays the following informa- Press and release the MENU button until one of the tion: following Trip Functions displays in the EVIC: • Distance To Empty (DTE) • Distance To Empty Shows the estimated distance that can be traveled with the fuel remaining in the tank.
  • Page 173 UNDERSTANDING YOUR INSTRUMENT PANEL 173 • Trip A • Engine Oil Temperature Shows the total distance traveled for Trip A since the last Shows the current engine oil temperature. The scale will reset. read from 140° – 300°F (60° – 149°C). •...
  • Page 174: Performance Pages - If Equipped

    174 UNDERSTANDING YOUR INSTRUMENT PANEL • 1/8 Mile Performance Pages — If Equipped • 1/4 Mile WARNING! • Instantaneous G-Force Measurement of vehicle statistics with the Perfor- • Peak G-Force mance Pages is intended for off-highway or off-road use only and should not be done on any public To access, press and release the MENU button until roadways.
  • Page 175 UNDERSTANDING YOUR INSTRUMENT PANEL 175 • Dashes will display if the vehicle fails to reach 60 mph • Engaging the parking brake will disable this feature. (100 km/h) in less then 10 seconds. • The word “READY” will flash when conditions are •...
  • Page 176 176 UNDERSTANDING YOUR INSTRUMENT PANEL • To clear the vehicle’s best 1/8 mile (1/4 mile) run, 1/8 Mile, 1/4 Mile When selected, this screen displays the time it takes the press and hold the FUNCTION SELECT button for vehicle to travel 1/8 mile (1/4 mile) within 30 seconds five seconds.
  • Page 177: Compass Display

    UNDERSTANDING YOUR INSTRUMENT PANEL 177 Compass Display 1. Turn on the ignition switch. The compass readings indicate the direction 2. Press the MENU button until Personal Settings the vehicle is facing. Press and release the (Customer-Programmable Features) menu is reached. COMPASS/TEMPERATURE button to display one of eight compass readings and the outside 3.
  • Page 178: Driver-Selectable Surround Sound (Dss) - If Equipped

    178 UNDERSTANDING YOUR INSTRUMENT PANEL give false readings. For the most accurate compass per- 1. Turn the ignition switch ON. formance, the compass variance must be set using the 2. Press the MENU button until Personal Settings following procedure: (Customer-Programmable Features) menu is reached. NOTE: Magnetic materials should be kept away from 3.
  • Page 179: Personal Settings (Customer-Programmable Features)

    UNDERSTANDING YOUR INSTRUMENT PANEL 179 While in the Surround Sound menu, press the FUNC- NOTE: The EVIC will not change the uconnect™ lan- TION SELECT button to change surround modes. guage selection. Please refer to “Language Selection” in the uconnect™ phone section of this manual for details. Personal Settings (Customer-Programmable Features) Auto Door Locks...
  • Page 180 180 UNDERSTANDING YOUR INSTRUMENT PANEL Remote Key Unlock Flash Lamps with Lock When “Driver Door 1st Press” is selected, only the When YES (Y) is selected, the front and rear turn signals driver’s door will unlock on the first press of the Remote will flash when the doors are locked or unlocked with the Keyless Entry RKE transmitter UNLOCK button.
  • Page 181 UNDERSTANDING YOUR INSTRUMENT PANEL 181 SELECT button until YES (Y) or NO (N) appears. Refer to the windshield. To make your selection, press and release “Lights/SmartBeam™ — If Equipped” in Section 3 of the FUNCTION SELECT button until YES (Y) or NO (N) this manual for more information.
  • Page 182 182 UNDERSTANDING YOUR INSTRUMENT PANEL Easy Entry/Exit Seat (Available with Memory Seat after the ignition switch is turned off. Opening a vehicle Only) door will cancel this feature. To make your selection, This feature provides automatic driver seat positioning to press and release the FUNCTION SELECT button until enhance driver mobility when entering and exiting the “Off,”...
  • Page 183: System Status

    UNDERSTANDING YOUR INSTRUMENT PANEL 183 System Status Press and release the MENU button until one of the following System Status messages displays in the EVIC: • System OK • System Warnings Displayed (will display all currently active System Warnings) • Tire Pressure Monitor System (shows the current pres- sure of all four road tires).
  • Page 184: Sales Code (Rer/Ren) - Am/Fm/Cd/Dvd Radio - If Equipped

    184 UNDERSTANDING YOUR INSTRUMENT PANEL • Your system can be set to display pressure units in PSI, Operating Instructions — Voice Recognition kPa, or BAR. System (VR) — If Equipped Refer to “Voice Recognition System (VR)” in the SALES CODE (RER/REN) — AM/FM/CD/DVD uconnect™...
  • Page 185 UNDERSTANDING YOUR INSTRUMENT PANEL 185 To Manually Set the Clock — RER/REN 6. To save the new time setting, touch the screen where the word “Save” is displayed. 1. Turn on the radio. Changing Daylight Savings Time 2. Touch the screen where the time is displayed. When selected, this feature will display the time of day in 3.
  • Page 186 186 UNDERSTANDING YOUR INSTRUMENT PANEL Show Time if Radio is Off Changing the Time Zone When selected, this feature will display the time of day 1. Turn on the radio. on the touch screen when the radio is turned off. Proceed as follows to change the current setting: 2.
  • Page 187: Sales Code Res - Am/Fm Stereo Radio With Cd Player (Mp3 Aux Jack)

    UNDERSTANDING YOUR INSTRUMENT PANEL 187 SALES CODE RES — AM/FM STEREO RADIO Operating Instructions — Radio Mode WITH CD PLAYER (MP3 AUX JACK) NOTE: The ignition switch must be in the ON or ACC NOTE: The radio sales code is located on the lower right position to operate the radio.
  • Page 188 188 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Buttons 4. Adjust the minutes using the right side TUNE/ Press and release the SEEK buttons to search for the next SCROLL control knob. Press the TUNE/SCROLL control listenable station in AM/FM mode. Press the right switch knob to save time change.
  • Page 189 UNDERSTANDING YOUR INSTRUMENT PANEL 189 Push the rotary TUNE/SCROLL control knob a second Push the rotary TUNE/SCROLL control knob again to time and MID will display. Turn the TUNE/SCROLL exit setting tone, balance, and fade. control knob to the right or left to increase or decrease the AM/FM Button mid-range tones.
  • Page 190: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play

    190 UNDERSTANDING YOUR INSTRUMENT PANEL You may add a second station to each pushbutton by Operation Instructions — CD MODE For CD And repeating the above procedure with this exception: Press MP3 Audio Play the SET/RND button twice and SET 2 will show in the NOTE: display window.
  • Page 191 UNDERSTANDING YOUR INSTRUMENT PANEL 191 If you insert a disc with the ignition ON and the radio EJECT Button - Ejecting a CD ON, the unit will switch from radio to CD mode and Press the EJECT button to eject the CD. begin to play when you insert the disc.
  • Page 192: Notes On Playing Mp3 Files

    192 UNDERSTANDING YOUR INSTRUMENT PANEL the current selection. Pressing and holding the SEEK SET/RND Button (Random Play Button) button will allow faster scrolling through the tracks in Press this button while the CD is playing to activate CD and MP3 modes. Random Play.
  • Page 193 UNDERSTANDING YOUR INSTRUMENT PANEL 193 • Maximum number of characters in file/folder names: Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 • Level 1: 12 (including a separator . and a three- Level 1 and Level 2 and includes the Joliet extension. character extension) When reading discs recorded using formats other than •...
  • Page 194 194 UNDERSTANDING YOUR INSTRUMENT PANEL When using the MP3 encoder to compress audio data to Playlist files are not supported. MP3 Pro files are not an MP3 file, the bit rate and sampling frequencies in the supported. following table are supported. In addition, variable bit Playback of MP3 Files rates (VBR) are also supported.
  • Page 195: Operation Instructions - Auxiliary Mode

    UNDERSTANDING YOUR INSTRUMENT PANEL 195 To increase the speed of disc loading, it is recommended NOTE: The AUX device must be turned on and the to use CD-R media and single-session discs. To create a device’s volume set to proper level. If the AUX audio is single-session disc, enable the “Disc at Once”...
  • Page 196: Sales Code Res/Rsc - Am/Fm Stereo Radio With Cd Player (Mp3 Aux Jack) And Sirius Radio

    196 UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE RES/RSC — AM/FM STEREO Operating Instructions — Radio Mode RADIO WITH CD PLAYER (MP3 AUX JACK) AND NOTE: The ignition switch must be in the ON or ACC SIRIUS RADIO position to operate the radio. NOTE: The radio sales code is located on the lower right Power Switch/Volume Control (Rotary) side of the radio faceplate.
  • Page 197 UNDERSTANDING YOUR INSTRUMENT PANEL 197 SEEK Buttons If your vehicle is not equipped with or this feature is not Press and release the SEEK buttons to search for the next available on your vehicle, a “Not Equipped With listenable station in AM/FM mode. Press the right switch UConnect”...
  • Page 198 198 UNDERSTANDING YOUR INSTRUMENT PANEL Clock Setting Procedure starting at Step 2. For vehicles not equipped with satellite radio, press the SETUP button and then follow the above 1. Press and hold the TIME button until the hours blink. procedure, starting at Step 2. 2.
  • Page 199 UNDERSTANDING YOUR INSTRUMENT PANEL 199 Setting the Tone, Balance, and Fade Push the rotary TUNE/SCROLL control knob a fifth time Push the rotary TUNE/SCROLL control knob and BASS and FADE will display. Turn the TUNE/SCROLL control will display. Turn the TUNE/SCROLL control knob to knob to the left or right to adjust the sound level between the right or left to increase or decrease the bass tones.
  • Page 200 200 UNDERSTANDING YOUR INSTRUMENT PANEL Toggle the MUSIC TYPE button to select the following Program Type 16-Digit Character Display format types: Public Public Program Type 16-Digit Character Display Rhythm and Blues R & B No program type or Religious Music Rel Musc None undefined...
  • Page 201 UNDERSTANDING YOUR INSTRUMENT PANEL 201 By pressing the SEEK button when the Music Type icon the minutes using the right side TUNE/SCROLL is displayed, the radio will be tuned to the next frequency control knob. Press the TUNE/SCROLL control knob station with the same selected Music Type name.
  • Page 202: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play

    202 UNDERSTANDING YOUR INSTRUMENT PANEL You may add a second station to each pushbutton by Operation Instructions — CD MODE for CD and repeating the above procedure with this exception: Press MP3 Audio Play the SET/RND button twice and SET 2 will show in the NOTE: display window.
  • Page 203 UNDERSTANDING YOUR INSTRUMENT PANEL 203 If you insert a disc with the ignition ON and the radio EJECT Button - Ejecting a CD ON, the unit will switch from radio to CD mode and Press the EJECT button to eject the CD. begin to play when you insert the disc.
  • Page 204: Notes On Playing Mp3 Files

    204 UNDERSTANDING YOUR INSTRUMENT PANEL TIME Button Press the SET/RND button a second time to stop Ran- Press this button to change the display from a large CD dom Play. playing time display to a small CD playing time display. Notes On Playing MP3 Files RW/FF The radio can play MP3 files;...
  • Page 205 UNDERSTANDING YOUR INSTRUMENT PANEL 205 The radio uses the following limits for file systems: Multisession disc formats are supported by the radio. Multisession discs may contain combinations of normal • Maximum number of folder levels: 8 CD audio tracks and computer files (including MP3 files). •...
  • Page 206 206 UNDERSTANDING YOUR INSTRUMENT PANEL Playback of MP3 Files MPEG Sampling Bit Rate (kbps) When a medium containing MP3 data is loaded, the Specification Frequency (kHz) radio checks all files on the medium. If the medium 320, 256, 224, contains a lot of folders or files, the radio will take more MPEG-1 Audio 192, 160, 128, 48, 44.1, 32...
  • Page 207: List Button (Cd Mode For Mp3 Play)

    UNDERSTANDING YOUR INSTRUMENT PANEL 207 LIST Button (CD Mode for MP3 Play) Press and hold the INFO button again for three seconds Pressing the LIST button will bring up a list of all folders to return to elapsed time display. on the disc.
  • Page 208: Universal Consumer Interface (Uci) - If Equipped

    208 UNDERSTANDING YOUR INSTRUMENT PANEL TIME Button (Auxiliary Mode) UNIVERSAL CONSUMER INTERFACE (UCI) — IF Press this button to change the display to time of day. The EQUIPPED time of day will display for five seconds (when the NOTE: This section is for sales code RES and REQ/ ignition is OFF).
  • Page 209: Connecting The Ipod

    UNDERSTANDING YOUR INSTRUMENT PANEL 209 NOTE: NOTE: • If the radio has a USB port, connecting an iPod to this • You may have to remove the connector pin protection port does not play the media. For playing an iPod , cap from the 16–pin connector port, prior to connect- use the separate 16–pin connector port (in the glove ing the cable.
  • Page 210: Controlling The Ipod Using Radio Buttons

    210 UNDERSTANDING YOUR INSTRUMENT PANEL Controlling The iPod Using Radio Buttons jump to the previous track in the list. Turning this To get into the UCI (iPod ) mode and access a connected button at any other time in the track, will jump to iPod , press the “AUX”...
  • Page 211: List Or Browse Mode

    UNDERSTANDING YOUR INSTRUMENT PANEL 211 beginning of the track. If you press the SEEK >> During Scan mode, you can also press the << SEEK button during play mode, it will jump to the next track and SEEK >> buttons to select the previous and next in the list.
  • Page 212 212 UNDERSTANDING YOUR INSTRUMENT PANEL • Preset 5 - Audiobooks the track to be played highlighted on the radio display, press the TUNE control knob to select and • Preset 6 – Podcasts start playing the track. Turning the TUNE control •...
  • Page 213: Uconnect™ Studios (Satellite Radio) - If Equipped (Ren/Rer/Res Radios Only)

    UNDERSTANDING YOUR INSTRUMENT PANEL 213 • MUSIC TYPE button: The MUSIC TYPE button is uconnect™ studios (SATELLITE RADIO) — IF another shortcut button to the genre listing on your EQUIPPED (REN/RER/RES RADIOS ONLY) iPod . Satellite radio uses direct satellite-to-receiver broadcast- ing technology to provide clear digital sound, coast to CAUTION! coast.
  • Page 214: Electronic Serial Number/Sirius Identification Number (Esn/Sid)

    214 UNDERSTANDING YOUR INSTRUMENT PANEL information, call the toll-free number 888-539-7474, or Sirius ID number will display. The Sirius ID number visit the Sirius web site at www.sirius.com, or at www- display will time out in two minutes. Press any button on .siriuscanada.ca for Canadian residents.
  • Page 215: Reception Quality

    UNDERSTANDING YOUR INSTRUMENT PANEL 215 bikes should be placed as far rearward as possible, within Operating Instructions - uconnect™ studios the loading design of the rack. Do not place items directly (Satellite) Mode on or above the antenna. NOTE: The ignition switch must be in the ON or ACC Reception Quality position to operate the radio.
  • Page 216 216 UNDERSTANDING YOUR INSTRUMENT PANEL INFO Button MUSIC TYPE Button Pressing the INFO button will cycle the display informa- Pressing this button once will turn on the Music Type tion between Artist, Song Title, and Composer (if avail- mode for five seconds. Pressing the MUSIC TYPE button able).
  • Page 217: Operating Instructions - Uconnect™ Phone (If Equipped)

    UNDERSTANDING YOUR INSTRUMENT PANEL 217 SETUP Button You may add a second channel to each pushbutton by Pressing the SETUP button allows you to select the repeating the above procedure with this exception: Press following items: the SET button twice and SET 2 will show in the display window.
  • Page 218: Kicker High Performance Sound System With Driver-Selectable Surround (Dss) - If Equipped

    218 UNDERSTANDING YOUR INSTRUMENT PANEL KICKER HIGH PERFORMANCE SOUND SYSTEM DSS modes for audio sources are “Stereo” and “Audio WITH DRIVER-SELECTABLE SURROUND (DSS) – Surround,” which is surround sound equalized for the front seat occupants. The “Video Surround” mode is IF EQUIPPED Your vehicle is equipped with a state of the art audio described under “KICKER Mobile Surround (KMS1).
  • Page 219 UNDERSTANDING YOUR INSTRUMENT PANEL 219 Installing The Subwoofer 2. Align the left outside edge of the subwoofer with the outside edge of the inner cargo tie down hook. 1. Lower the left rear passenger seat.
  • Page 220 220 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Slide the subwoofer toward the front of the vehicle so Removing The Subwoofer that the rear edge lines up with the end of the load floor. 1. Lower the left rear passenger seat. 4. Connect the electrical connector. 2.
  • Page 221: Uconnect™ Studios (Sirius Backseat Tv™) - If Equipped

    UNDERSTANDING YOUR INSTRUMENT PANEL 221 uconnect™ studios (SIRIUS BACKSEAT TV™) — screen, a battery-powered remote control, and two head- IF EQUIPPED sets. Refer to the “uconnect™ studios” section of Satellite video uses direct satellite receiver broadcasting uconnect™ User Manual located on the DVD for further technology to provide streaming video.
  • Page 222: Kicker Mobile Surround (Kms1) - If Equipped

    222 UNDERSTANDING YOUR INSTRUMENT PANEL Kicker Mobile Surround (KMS1) – If Equipped The VES™ for this vehicle comes equipped with Kicker Mobile Surround (KMS1). This feature offers the ulti- mate movie experience by providing surround sound uniquely equalized for the interior space of your vehicle. The KMS1 Video Surround mode activates whenever a video source is selected, unless the system is already in “Audio Surround”...
  • Page 223: Remote Sound System Controls - If Equipped

    UNDERSTANDING YOUR INSTRUMENT PANEL 223 REMOTE SOUND SYSTEM CONTROLS — IF The right-hand control is a rocker-type switch with a EQUIPPED pushbutton in the center and controls the volume and The remote sound system controls are located on the rear mode of the sound system.
  • Page 224: Cd Player

    224 UNDERSTANDING YOUR INSTRUMENT PANEL The button located in the center of the left-hand control CD/DVD MAINTENANCE will tune to the next preset station that you have pro- To keep a CD/DVD in good condition, take the following grammed in the radio preset pushbutton. precautions: CD Player 1.
  • Page 225: Radio Operation And Cellular Phones

    UNDERSTANDING YOUR INSTRUMENT PANEL 225 NOTE: If you experience difficulty in playing a particu- CLIMATE CONTROLS lar disc, it may be damaged (i.e., scratched, reflective Automatic Temperature Control coating removed, a hair, moisture or dew on the disc) The Automatic Temperature Control System automati- oversized, or have protection encoding.
  • Page 226 226 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The numbers on the temperature dial represent You will experience the greatest efficiency by simply a comfort setting when the Mode knob is set to AUTO, allowing the system to function automatically. Selecting and not the actual air temperature. the OFF (O) position on the blower control knob stops the system completely.
  • Page 227 UNDERSTANDING YOUR INSTRUMENT PANEL 227 • Under certain conditions (after the vehicle is turned The system will automatically control re- circulation. However, pressing this button off) the climate control system may recalibrate and a will temporarily put the system in “Recir- noise may be heard for 20 seconds.
  • Page 228 228 UNDERSTANDING YOUR INSTRUMENT PANEL Manual Operation NOTE: • For vehicles equipped with Remote Start, the climate This system offers a full complement of manual override features which consist of Blower Preferred Automatic, controls will not function during Remote Start opera- Mode Preferred Automatic with Manual Air Temperature tion if the blower control is left in the “O”...
  • Page 229 UNDERSTANDING YOUR INSTRUMENT PANEL 229...
  • Page 230 230 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Regardless of the type of operation, when a NOTE: The defrost mode is not automatically selected. temperature knob is set to the full clockwise or full It must be manually selected, when desired. counterclockwise position, the system will deliver full Defrost/Floor hot or full cold air out of the ducts, respectively.
  • Page 231 UNDERSTANDING YOUR INSTRUMENT PANEL 231 Bi-Level Air Conditioning Air flows both through the outlets located in the Press this button to turn the air conditioning on instrument panel and those located on the floor. Air and off during manual operation only. Condi- flows through the registers in the back of the center tioned outside air is then directed through the console, and under the front seats to the rear seat...
  • Page 232: Operating Tips

    232 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Extended use of recirculation may cause the button) on will clear the fog. Adjust the temperature windows to fog. If the interior of the windows begins to control, air direction, and blower speed to maintain fog, press the “Recirculate”...
  • Page 233 UNDERSTANDING YOUR INSTRUMENT PANEL 233 Summer Operation Your air conditioning system is also equipped with an Air conditioned vehicles must be protected with a high automatic recirculation system. When the system senses quality antifreeze coolant, during the summer, to provide a heavy load or high heat conditions, it may use partial proper corrosion protection and to raise the boiling point Recirculation A/C mode to provide additional comfort.
  • Page 234: Operating Tips Chart

    234 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Tips Chart...
  • Page 235: Starting And Operating

    STARTING AND OPERATING CONTENTS ▫ Brake/Transmission Interlock Manual Starting Procedure ..... 238 Override ......241 ▫...
  • Page 236 236 STARTING AND OPERATING Power Steering ..... . . 248 Tire Safety Information ....261 ▫...
  • Page 237 STARTING AND OPERATING 237 ▫ Replacement Tires ....275 ▫ Carbon Monoxide Warnings ... . 284 Tire Rotation Recommendations .
  • Page 238: Starting Procedure

    238 STARTING AND OPERATING STARTING PROCEDURE Normal Starting Before starting your vehicle, adjust your seat, adjust the Tip Start inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat NOTE: Normal starting of either a cold or a warm belts.
  • Page 239: Extreme Cold Weather (Below 20°F Or 29°C)

    STARTING AND OPERATING 239 Extreme Cold Weather (Below 20°F or 29°C) WARNING! (Continued) To ensure reliable starting at these temperatures, use of • Do not attempt to push or tow your vehicle to get an externally powered electric engine block heater (avail- it started.
  • Page 240: After Starting

    240 STARTING AND OPERATING If the engine fails to start after you have followed the AUTOMATIC TRANSMISSION “Normal Starting” or “Extreme Cold Weather” proce- CAUTION! dures, it may be flooded. To clear any excess fuel, push the accelerator pedal all the way to the floor and hold it. Damage to the transmission may occur if the follow- Then, turn the ignition switch to the START position and ing precautions are not observed:...
  • Page 241: Key Ignition Park Interlock

    STARTING AND OPERATING 241 Brake/Transmission Shift Interlock System WARNING! This vehicle is equipped with a Brake Transmission Shift Interlock System (BTSI) that holds the shift lever in the It is dangerous to move the shift lever out of PARK or PARK position when the ignition switch is in the LOCK NEUTRAL if the engine speed is higher than idle position.
  • Page 242: Five-Speed Automatic Transmission

    242 STARTING AND OPERATING 3. Using a flat blade screwdriver, carefully remove the 6. Move the shift lever into the NEUTRAL position. shift lock manual override cover which is located on the 7. The vehicle may then be started in NEUTRAL. PRNDL bezel.
  • Page 243: Gear Ranges

    STARTING AND OPERATING 243 Gear Ranges WARNING! NOTE: After selecting any gear range, wait a moment to It is dangerous to move the shift lever out of PARK or allow the selected gear to engage before accelerating. NEUTRAL if the engine speed is higher than idle This is especially important when the engine is cold.
  • Page 244: Rocking The Vehicle

    244 STARTING AND OPERATING NEUTRAL WARNING! This range is used when vehicle is standing for pro- longed periods with engine running. Engine may be Unintended movement of a vehicle could injure started in this range. Set the parking brake if you must those in and near the vehicle.
  • Page 245: Autostick

    STARTING AND OPERATING 245 NOTE: The Electronic Stability Program (ESP) and CAUTION! Traction Control (if equipped) should be turned OFF before attempting to rock the vehicle. Refer to “Electronic When “rocking” a stuck vehicle by moving between Brake Control System” in Section 5 of this manual. DRIVE and REVERSE, do not spin the wheels faster than 15 mph (24 km/h), or drivetrain damage may The least amount of accelerator pedal pressure to main-...
  • Page 246: Autostick Operation

    246 STARTING AND OPERATING Autostick Operation Once Autostick mode is engaged, a move to the right (+) By placing the shift lever in the DRIVE position, the shift or left (-) will trigger a upshift (+) or trigger a downshift lever can be moved from side to side.
  • Page 247: General Information

    STARTING AND OPERATING 247 When in the Autostick mode, as the engine RPM nears General Information the engine maximum speed, an “UPSHIFT” message will • You can start out in first or second gear. The system appear in the Electronic Vehicle Information Center will ignore attempts to upshift at too low of a vehicle (EVIC) portion of your instrument cluster.
  • Page 248: Power Steering

    248 STARTING AND OPERATING • Transmission shifting will be more noticeable when due to the cold, thick fluid in the steering system. This Autostick is engaged. noise should be considered normal, and it does not in any way damage the steering system. POWER STEERING The standard power steering system will give you good WARNING!
  • Page 249: Power Steering Fluid Check

    STARTING AND OPERATING 249 Power Steering Fluid Check Checking the power steering fluid level at a defined The power steering system requires the use of MOPAR service interval is not required. The fluid should only be Hydraulic System Power Steering Fluid or equivalent, checked if a leak is suspected, abnormal noises are which meets Chrysler Material Standard MS-10838.
  • Page 250: Parking Brake

    250 STARTING AND OPERATING PARKING BRAKE To set the parking brake, pull the lever up as firmly as possible. When the parking brake is applied with the ignition ON, the “Brake Warning Light” in the instru- ment cluster will light. To release the parking brake, pull up slightly, press the center button, then lower the lever completely.
  • Page 251: Anti-Lock Brake System

    STARTING AND OPERATING 251 When parking on a hill, turn the front wheels toward the WARNING! curb on a downhill grade and away from the curb on an • Always fully apply the parking brake when leav- uphill grade. ing your vehicle, or it may roll and cause damage The parking brake should always be applied whenever or injury.
  • Page 252 252 STARTING AND OPERATING WARNING! WARNING! • Pumping of the Anti-Lock Brakes will diminish Significant over or under inflation of tires can lead to loss of braking effectiveness. their effectiveness and may lead to an accident. Pumping makes the stopping distance longer. Just The Anti-Lock Brake System conducts a low-speed self- press firmly on your brake pedal when you need test at about 12 mph (20 km/h).
  • Page 253 STARTING AND OPERATING 253 WARNING! (Continued) WARNING! • The capabilities of an ABS equipped vehicle must To use your brakes and accelerator more safely, never be exploited in a reckless or dangerous follow these tips: manner which could jeopardize the user’s safety •...
  • Page 254: Electronic Brake Control System

    254 STARTING AND OPERATING ELECTRONIC BRAKE CONTROL SYSTEM WARNING! (Continued) Your vehicle is equipped with an advanced electronic • Do not drive too fast for road conditions, espe- brake control system that includes Anti-Lock Brake Sys- cially when roads are wet or slushy. A wedge of tem (ABS), Traction Control System (TCS), Brake Assist water can build up between the tire tread and the System (BAS), Electronic Roll Mitigation (ERM), and...
  • Page 255: Traction Control System (Tcs)

    STARTING AND OPERATING 255 stability. A feature of the TCS system functions similar to WARNING! a limited slip differential and controls the wheel spin across a driven axle. If one wheel on a driven axle is The Anti-Lock Brake System (ABS) cannot prevent spinning faster than the other, the system will apply the the natural laws of physics from acting on the ve- brake of the spinning wheel.
  • Page 256: Electronic Roll Mitigation (Erm)

    256 STARTING AND OPERATING benefit of the system, you must apply continuous brak- Electronic Roll Mitigation (ERM) ing pressure during the stopping sequence (do not This system anticipates the potential for wheel lift by “pump” the brakes). Do not reduce brake pedal pressure monitoring the driver’s steering wheel input and the unless braking is no longer desired.
  • Page 257: Electronic Stability Program (Esp)

    STARTING AND OPERATING 257 the brake of the appropriate wheel to assist in counter- WARNING! acting the over/under steer condition. Engine power may also be reduced to help the vehicle maintain the Many factors, such as vehicle loading, road condi- desired path.
  • Page 258 258 STARTING AND OPERATING Light” also flashes when TCS is active. If the “ESP/TCS The ESP system has two available operating modes. Indicator Light” begins to flash during acceleration, ease up on the accelerator and apply as little throttle as This is the normal operating mode for ESP.
  • Page 259: Trailer Sway Control (Tsc)

    STARTING AND OPERATING 259 turn ESP on again, momentarily press the ESP OFF” Off” mode by pressing the “ESP OFF” switch. Once the switch. This will restore the normal “ESP On” mode of situation requiring ESP to be switched to the “ESP Partial operation.
  • Page 260: Esp/Bas Warning Light And Esp/Tcs Indicator Light

    260 STARTING AND OPERATING flash, the engine power may be reduced and you may If the “ESP/BAS Warning Light” comes on feel the brakes being applied to individual wheels to continuously with the engine running, a mal- attempt to stop the trailer from swaying. TSC is disabled function has been detected in either the ESP or when the ESP system is in the “Partial Off”...
  • Page 261: Tire Safety Information

    STARTING AND OPERATING 261 TIRE SAFETY INFORMATION NOTE: • P (Passenger) - Metric tire sizing is based on U.S. Tire Markings design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. •...
  • Page 262 262 STARTING AND OPERATING • Temporary spare tires are high-pressure compact • High flotation tire sizing is based on U.S. design spares designed for temporary emergency use only. standards and it begins with the tire diameter molded Tires designed to this standard have the letter “T” into the sidewall.
  • Page 263 STARTING AND OPERATING 263 Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ..blank..= Passenger car tire based on European design standards LT = Light truck tire based on U.S. design standards T = Temporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm)
  • Page 264 264 STARTING AND OPERATING EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions —...
  • Page 265: Tire Identification Number (Tin)

    STARTING AND OPERATING 265 Tire Identification Number (TIN) Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on The TIN may be found on one or both sides of the tire, the outboard side, then you will find it on the inboard however, the date code may only be on one side.
  • Page 266: Tire Loading And Tire Pressure

    266 STARTING AND OPERATING Tire Loading and Tire Pressure This placard tells you important information about the: Tire Placard Location 1) number of people that can be carried in the vehicle NOTE: The proper cold tire inflation pressure is listed 2) total weight your vehicle can carry on the driver’s side B-Pillar.
  • Page 267 STARTING AND OPERATING 267 NOTE: Under a maximum loaded vehicle condition, 2. Determine the combined weight of the driver and gross axle weight ratings (GAWRs) for the front and rear passengers that will be riding in your vehicle. axles must not be exceeded. For further information on 3.
  • Page 268 268 STARTING AND OPERATING • For the following example, the combined weight of 6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this occupants and cargo should never exceed 865 lbs manual to determine how this reduces the available (392 kg).
  • Page 269 STARTING AND OPERATING 269...
  • Page 270: Tires - General Information

    270 STARTING AND OPERATING WARNING! WARNING! Overloading of your tires is dangerous. Overloading Do not exceed 50 mph (80 km/h) if the “Tire Pressure can cause tire failure, affect vehicle handling, and Monitoring Telltale Light” is illuminated. Vehicle increase your stopping distance. Use tires of the handling and braking may be reduced.
  • Page 271 STARTING AND OPERATING 271 Safety Economy Improper inflation pressures can cause uneven wear WARNING! patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for • Improperly inflated tires are dangerous and can earlier tire replacement.
  • Page 272: Tire Inflation Pressures

    272 STARTING AND OPERATING Tire Inflation Pressures is defined as the tire pressure after the vehicle has not The proper cold tire inflation pressure is listed on the been driven for at least three hours, or driven less than driver’s side “B” Pillar. 1 mile (1.6 km) after a three hour period.
  • Page 273: Tire Pressures For High Speed Operation

    STARTING AND OPERATING 273 Tire pressure may increase from 2 to 6 psi (13 to 40 kPa) WARNING! during operation. DO NOT reduce this normal pressure build up or your tire pressure will be too low. High speed driving with your vehicle under maxi- mum load is dangerous.
  • Page 274: Tire Spinning

    274 STARTING AND OPERATING Cuts and punctures in radial tires are repairable only in Tread Wear Indicators the tread area because of sidewall flexing. Consult your Tread wear indicators are in the original equipment tires dealer for radial tire repairs. to help you in determining when your tires should be replaced.
  • Page 275: Life Of Tire

    STARTING AND OPERATING 275 These indicators are molded into the bottom of the tread Keep unmounted tires in a cool, dry place with as little grooves. They will appear as bands when the tread depth exposure to light as possible. Protect tires from contact becomes 1/16 in (2 mm).
  • Page 276: Tire Rotation Recommendations

    276 STARTING AND OPERATING WARNING! WARNING! (Continued) • Failure to equip your vehicle with tires having • Do not use a tire, wheel size or rating other than adequate speed capability can result in sudden tire that specified for your vehicle. Some combinations failure and loss of vehicle control.
  • Page 277: Tire Pressure Monitor System (Tpms)

    STARTING AND OPERATING 277 • Various Tire Pressure Monitoring System Messages, TIRE PRESSURE MONITOR SYSTEM (TPMS) which display in the Electronic Vehicle Information Premium System Center (EVIC), and a graphic displaying tire pressures The Tire Pressure Monitor System (TPMS) uses wireless •...
  • Page 278 278 STARTING AND OPERATING NOTE: Your system can be set to display pressure units The system will automatically update, the graphic dis- in PSI, kPa, or BAR. play of the pressure value(s) will stop flashing, and the “Tire Pressure Monitoring Telltale Light” will extinguish once the updated tire pressure(s) have been received.
  • Page 279 STARTING AND OPERATING 279 1. Jamming due to electronic devices or driving next to facilities emitting the same Radio Frequencies as the TPM sensors. 2. Installing some form of aftermarket window tinting that affects radio wave signals. 3. Lots of snow or ice around the wheels or wheel housings.
  • Page 280: General Information

    280 STARTING AND OPERATING General Information FUEL REQUIREMENTS This device complies with part 15 of the FCC rules and 6.1L Engine RSS 210 of Industry Canada. Operation is subject to the The 6.1L engine is designed to meet all following conditions: emissions regulations and provide excel- •...
  • Page 281: Reformulated Gasoline

    STARTING AND OPERATING 281 Over 40 auto manufacturers worldwide have issued and Gasoline/Oxygenate Blends endorsed consistent gasoline specifications (the World- Some fuel suppliers blend unleaded gasoline with oxy- wide Fuel Charter, WWFC) which define fuel properties genates such as 10% ethanol, MTBE, and ETBE. Oxygen- necessary to deliver enhanced emissions, performance, ates are required in some areas of the country during the and durability for your vehicle.
  • Page 282: E-85 Usage In Non-Flex Fuel Vehicles

    282 STARTING AND OPERATING • disconnect and reconnect the battery to reset the E-85 Usage In Non-Flex Fuel Vehicles Non-FFV vehicles are compatible with gasoline contain- engine controller memory ing 10% ethanol (E10). Gasoline with higher ethanol More extensive repairs will be required for prolonged content may void the vehicle’s warranty.
  • Page 283: Materials Added To Fuel

    STARTING AND OPERATING 283 • The use of leaded gas is prohibited by Federal law. can be used at levels higher than those allowed in the United States. MMT is prohibited in Federal and Califor- Using leaded gasoline can impair engine performance nia reformulated gasoline.
  • Page 284: Carbon Monoxide Warnings

    284 STARTING AND OPERATING • Guard against carbon monoxide with proper mainte- Carbon Monoxide Warnings nance. Have the exhaust system inspected every time WARNING! the vehicle is raised. Have any abnormal conditions repaired promptly. Until repaired, drive with all side Carbon monoxide (CO) in exhaust gases is deadly.
  • Page 285: Adding Fuel

    STARTING AND OPERATING 285 ADDING FUEL CAUTION! Fuel Filler Cap (Gas Cap) • Damage to the fuel system or emission control The gas cap is located behind the fuel filler door, on the system could result from using an improper fuel driver’s side of the vehicle.
  • Page 286 286 STARTING AND OPERATING WARNING! WARNING! • Never have any smoking materials lit in or near A fire may result if gasoline is pumped into a the vehicle when the gas cap is removed or the portable container that is inside of a vehicle. You tank filled.
  • Page 287: Trailer Towing

    STARTING AND OPERATING 287 TRAILER TOWING CAUTION! In this section you will find safety tips and information on limits to the type of towing you can reasonably do Damage to the fuel system or emission control sys- with your vehicle. Before towing a trailer carefully re- tem could result from using an improper fuel tank view this information to tow your load as efficiently and filler cap (gas cap).
  • Page 288: Common Towing Definitions

    288 STARTING AND OPERATING Common Towing Definitions Gross Combination Weight Rating (GCWR) The following trailer towing related definitions will assist The GCWR is the total permissible weight of your vehicle you in understanding the following information: and trailer when weighed in combination. Gross Vehicle Weight Rating (GVWR) NOTE: The GCWR rating includes a 150 lbs (68 kg) The GVWR is the total allowable weight of your vehicle.
  • Page 289 STARTING AND OPERATING 289 Tongue Weight (TW) Weight-Distributing Hitch The tongue weight is the downward force exerted on the A weight-distributing system works by applying lever- hitch ball by the trailer. In most cases it should not be less age through spring (load) bars. They are typically used than 10% or more than 15% of the trailer load.
  • Page 290: Trailer Hitch Classification

    290 STARTING AND OPERATING Trailer Hitch Classification Definitions WARNING! Class Max. Trailer Hitch Industry • An improperly adjusted weight-distributing hitch Standards system may reduce handling, stability, braking Class I - Light Duty 2,000 lbs (907 kg) performance, and could result in an accident. Class II - Medium 3,500 lbs (1 587 kg) •...
  • Page 291: Trailer Towing Weights (Maximum Trailer Weight Ratings)

    STARTING AND OPERATING 291 Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/ GCWR (Gross Combined Frontal Area Max. GTW (Gross Max. Trailer Tongue Transmission Wt. Rating) Trailer Wt.) Wt.
  • Page 292: Trailer And Trailer Tongue Weight

    292 STARTING AND OPERATING Trailer and Trailer Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle.
  • Page 293: Towing Requirements

    STARTING AND OPERATING 293 NOTE: Remember that everything put into or on the CAUTION! (Continued) trailer adds to the load on your vehicle. Also, additional • During the first 500 miles (805 km) of trailer factory-installed options, or dealer-installed options, towing, limit your speed to 50 mph (80 km/h).
  • Page 294 294 STARTING AND OPERATING • When hauling cargo or towing a trailer, do not over- • Total weight must be distributed between the tow load your vehicle or trailer. Overloading can cause a vehicle and the trailer such that the following four loss of control, poor performance or damage to brakes, ratings are not exceeded: axle, engine, transmission, steering, suspension, chas-...
  • Page 295 STARTING AND OPERATING 295 − Check the trailer tires for proper tire inflation pres- − An electronically actuated trailer brake controller is sures before trailer usage. required when towing a trailer with electronically actuated brakes. When towing a trailer equipped with −...
  • Page 296: Towing Tips

    296 STARTING AND OPERATING Automatic Transmission WARNING! The DRIVE range can be selected when towing. How- • Do not connect trailer brakes to your vehicle’s ever, if frequent shifting occurs while in this range, use the Autostick feature (D-) to select a lower gear range. hydraulic brake lines.
  • Page 297: Recreational Towing (Behind Motorhome, Etc.)

    STARTING AND OPERATING 297 Electronic Speed Control — If Equipped − Highway Driving Reduce speed. − Do not use in hilly terrain or with heavy loads. − Air Conditioning − When using the speed control, if you experience speed Turn off temporarily. drops greater than 10 mph (16 km/h), disengage until you can get back to cruising speed.
  • Page 299: What To Do In Emergencies

    WHAT TO DO IN EMERGENCIES CONTENTS Hazard Warning Flashers ....300 Jump-Starting ......301 If Your Engine Overheats .
  • Page 300: Hazard Warning Flashers

    300 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the switch bank just above the climate controls. potential for overheating by taking the appropriate ac- tion.
  • Page 301: Jump-Starting

    WHAT TO DO IN EMERGENCIES 301 NOTE: There are steps that you can take to slow down WARNING! an impending overheat condition: Do not exceed 50 mph (80 km/h) if the “Tire Pressure • If your air conditioner (A/C) is on, turn it off. The A/C Monitoring Telltale Light”...
  • Page 302 302 WHAT TO DO IN EMERGENCIES WARNING! WARNING! (Continued) • Do not use a booster battery or any other booster • Remove any metal jewelry such as watch bands or source that has a greater than 12 Volt system, i.e., bracelets that might make an inadvertent electrical do not use a 24 Volt power source.
  • Page 303 WHAT TO DO IN EMERGENCIES 303 4. Connect one end of a jumper cable to the positive WARNING! (Continued) terminal of the booster battery. Connect the other end of • During cold weather when temperatures are be- the same cable to the positive terminal of the discharged low the freezing point, electrolyte in a discharged battery.
  • Page 304: Emergency Tow Hooks - If Equipped

    304 WHAT TO DO IN EMERGENCIES 7. When removing the jumper cables, reverse the above EMERGENCY TOW HOOKS — IF EQUIPPED sequence exactly. Be careful of the moving belts and fan. If your vehicle is equipped with tow hooks, there will be one in the rear and two mounted on the front of the WARNING! vehicle.
  • Page 305: Towing A Disabled Vehicle

    WHAT TO DO IN EMERGENCIES 305 WARNING! CAUTION! Stand clear of vehicles when pulling with tow hooks. Towing this vehicle using any other method could Tow straps and chains may break, causing serious result in extensive damage to the transfer case and/or injury.
  • Page 307 MAINTAINING YOUR VEHICLE CONTENTS ▫ Engine Oil Filter Engine Compartment – 6.1L ... . . 309 ....316 ▫...
  • Page 308 308 MAINTAINING YOUR VEHICLE ▫ Brake System ▫ High Intensity Discharge Headlamps (HID) ..... . 329 — If Equipped ..... . 345 ▫...
  • Page 309: Engine Compartment - 6.1L

    MAINTAINING YOUR VEHICLE 309 ENGINE COMPARTMENT – 6.1L 1 — Engine Coolant Reservoir 7 — Engine Oil Dipstick 2 — Power Distribution Center 8 — Power Steering Fluid Reservoir 3 — Brake Fluid Reservoir 9 — Engine Oil Fill 4 — Integrated Power Module 10 —...
  • Page 310: Onboard Diagnostic System - Obd Ii

    310 MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM – OBD II CAUTION! Your vehicle is equipped with a sophisticated onboard • Prolonged driving with the MIL on could cause diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic further damage to the emission control system.
  • Page 311: Emissions Inspection And Maintenance Programs

    MAINTAINING YOUR VEHICLE 311 The message will remain displayed until the vehicle Failure to pass could prevent vehicle registration. diagnostic system can retest the fuel system. The test will For states that require an Inspection and Mainte- perform the next time the vehicle is started, if the vehicle nance (I/M), this check verifies the “Malfunction was keyed off above 40°F (4°C) outside temperature and Indicator Light (MIL)”...
  • Page 312 312 MAINTAINING YOUR VEHICLE 2. Turn the ignition to the ON position, but do not crank engine. This means that your vehicle’s OBD II system or start the engine. is ready and you can proceed to the I/M station. 3. If you crank or start the engine, you will have to start If your OBD II system is not ready, you should see your this test over.
  • Page 313: Replacement Parts

    MAINTAINING YOUR VEHICLE 313 REPLACEMENT PARTS WARNING! Use of genuine MOPAR parts for normal/scheduled maintenance and repairs is highly recommended to en- You can be badly injured working on or around a sure the designed performance. Damage or failures motor vehicle. Only do service work for which you caused by the use of non-MOPAR parts for maintenance have the knowledge and the proper equipment.
  • Page 314: Engine Oil

    314 MAINTAINING YOUR VEHICLE CAUTION! Engine Oil • Failure to properly maintain your vehicle or per- Checking Oil Level form repairs and service when necessary could To assure proper engine lubrication, the engine oil must result in more costly repairs, damage to other be maintained at the correct level.
  • Page 315 MAINTAINING YOUR VEHICLE 315 Engine Oil Selection CAUTION! For best performance and maximum protection under all • Overfilling or underfilling will cause oil aeration types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the or loss of oil pressure. This could damage your requirements of Chrysler Material Standard MS-10725 engine.
  • Page 316: Engine Oil Filter

    316 MAINTAINING YOUR VEHICLE The engine oil filler cap also shows the recommended indiscriminately discarded, can present a problem to the engine oil viscosity for your engine. For information on environment. Contact your dealer, service station, or engine oil filler cap location, refer to “Engine Compart- governmental agency for advice on how and where used ment”...
  • Page 317: Maintenance-Free Battery

    MAINTAINING YOUR VEHICLE 317 Maintenance-Free Battery WARNING! Your vehicle is equipped with a maintenance-free battery. You will never have to add water, nor is periodic main- The air cleaner can provide a measure of protection tenance required. in the case of engine backfire. Do not remove the air cleaner unless such removal is necessary for repair or CAUTION! maintenance.
  • Page 318: Air Conditioner Maintenance

    318 MAINTAINING YOUR VEHICLE Air Conditioner Maintenance WARNING! For best possible performance, your air conditioner • Use only refrigerants and compressor lubricants should be checked and serviced by an authorized dealer at the start of each warm season. This service should approved by the manufacturer for your air condi- include cleaning of the condenser fins and a performance tioning system.
  • Page 319: Body Lubrication

    MAINTAINING YOUR VEHICLE 319 NOTE: Use only manufacturer approved A/C System concerned should be wiped clean to remove dust and Sealers, Stop Leak Products, Seal Conditioners, Compres- grit; after lubricating excess oil and grease should be sor Oil, or Refrigerants. removed.
  • Page 320: Adding Washer Fluid

    320 MAINTAINING YOUR VEHICLE Operation of the wipers on dry glass for long periods windshield will light on the vehicle graphic outline and may cause deterioration of the wiper blades. Always use the “Washer Fluid Low” message will be displayed. Refer washer fluid when using the wipers to remove salt or dirt to “Electronic Vehicle Information Center”...
  • Page 321: Exhaust System

    MAINTAINING YOUR VEHICLE 321 inspect the exhaust system each time the vehicle is raised WARNING! for lubrication or oil change. Replace as required. Commercially available windshield washer solvents WARNING! are flammable. They could ignite and burn you. Care must be exercised when filling or working around Exhaust gases can injure or kill.
  • Page 322 322 MAINTAINING YOUR VEHICLE Under normal operating conditions, the catalytic con- NOTE: Intentional tampering with emissions control verter will not require maintenance. However, it is im- systems can result in civil penalties being assessed portant to keep the engine properly tuned to assure against you.
  • Page 323: Cooling System

    MAINTAINING YOUR VEHICLE 323 To minimize the possibility of catalyst damage: Cooling System • Do not shut off the engine or interrupt the ignition WARNING! when the transmission is in gear and the vehicle is in • When working near the radiator cooling fan, dis- motion.
  • Page 324 324 MAINTAINING YOUR VEHICLE Coolant Checks If the cap is sealing properly, the engine coolant (anti- Check the engine coolant (antifreeze) protection every freeze) will begin to drain from the coolant recovery 12 months (before the onset of freezing weather, where bottle.
  • Page 325 MAINTAINING YOUR VEHICLE 325 CAUTION! CAUTION! (Continued) • This vehicle has not been designed for use with • Mixing of engine coolant (antifreeze) other than Propylene Glycol based engine coolant (anti- specified HOAT engine coolant (antifreeze), may freeze). Use of Propylene Glycol based engine result in engine damage and may decrease corro- coolant (antifreeze) is not recommended.
  • Page 326: Maintaining Your Vehicle

    326 MAINTAINING YOUR VEHICLE When adding engine coolant (antifreeze): Please note that it is the owner’s responsibility to main- tain the proper level of protection against freezing ac- • The manufacturer recommends using MOPAR cording to the temperatures occurring in the area where Antifreeze/ Coolant 5 Year/100,000 Mile Formula the vehicle is operated.
  • Page 327 MAINTAINING YOUR VEHICLE 327 rules for your community. To prevent ingestion by ani- WARNING! mals or children, do not store ethylene glycol based • The warning words “DO NOT OPEN HOT” on engine coolant (antifreeze) in open containers or allow it to remain in puddles on the ground.
  • Page 328 328 MAINTAINING YOUR VEHICLE • Do not overfill the coolant recovery bottle. of this. As long as the engine operating temperature is satisfactory, the coolant bottle need only be checked once • Check engine coolant (antifreeze) freeze point in the a month.
  • Page 329: Brake System

    MAINTAINING YOUR VEHICLE 329 • Keep the front of the radiator clean. If your vehicle is pads wear. Brake fluid level should be checked when equipped with air conditioning, keep the front of the pads are replaced. If the brake fluid level is abnormally condenser clean.
  • Page 330: Automatic Transmission

    330 MAINTAINING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • To avoid contamination from foreign matter or • Do not allow petroleum based fluid to contami- moisture, use only new brake fluid or fluid that nate the brake fluid. Brake seal components could has been in a tightly closed container.
  • Page 331: Appearance Care And Protection From Corrosion

    MAINTAINING YOUR VEHICLE 331 The following maintenance recommendations will enable CAUTION! you to obtain maximum benefit from the corrosion resistance built into your vehicle. The fluid level is preset at the factory and does not require adjustment under normal operating condi- What Causes Corrosion? tions.
  • Page 332 332 MAINTAINING YOUR VEHICLE Washing CAUTION! • Wash your vehicle regularly. Always wash your ve- • Do not use abrasive or strong cleaning materials hicle in the shade using MOPAR Car Wash or a mild such as steel wool or scouring powder, which will car wash soap, and rinse the panels completely with scratch metal and painted surfaces.
  • Page 333 MAINTAINING YOUR VEHICLE 333 • If you detect any stone chips or scratches in the paint, Wheel and Wheel Trim Care touch them up immediately. The cost of such repairs is All wheels and wheel trim, especially aluminum and considered the responsibility of the owner. chrome-plated wheels should be cleaned regularly with a mild soap and water to prevent corrosion.
  • Page 334 334 MAINTAINING YOUR VEHICLE • For tough stains, apply MOPAR Total Clean or a mild if absolutely necessary. Do not use harsh cleaners or soap solution to a clean, damp cloth and remove the Armor All . Use MOPAR Total Clean or equivalent to stain.
  • Page 335 MAINTAINING YOUR VEHICLE 335 Cleaning Plastic Instrument Cluster Lenses WARNING! The lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, care Do not use volatile solvents for cleaning purposes. must be taken to avoid scratching the plastic. Many are potentially flammable, and if used in closed areas they may cause respiratory harm.
  • Page 336: Fuses

    336 MAINTAINING YOUR VEHICLE FUSES Cartridge Cavity Mini-Fuse Description Fuse Interior Fuses 30 Amp Audio Amp (B+) The fuse panel is on the lower instrument panel just to Green the left of the steering column. 15 Amp Sunroof (B+) Blue 10 Amp Htd Mirror (EBL) 20 Amp...
  • Page 337 MAINTAINING YOUR VEHICLE 337 Cartridge Cartridge Cavity Mini-Fuse Description Cavity Mini-Fuse Description Fuse Fuse 10 Amp Final Drive Control 20 Amp Cigar Ltr (R/A) Module (FDCM), Yellow Heater Ventilation/ 10 Amp Tire Pressure Tran- Air Conditioning sponders (R/O) (HVAC), Rear Heated 10 Amp Upper &...
  • Page 338: Underhood Fuses (Power Distribution Center)

    338 MAINTAINING YOUR VEHICLE Underhood Fuses (Power Distribution Center) Cartridge Cavity Mini-Fuse Description Fuse Spare (Acc Delay) 15 Amp Rear Wiper (B+) Blue 10 Amp Power Distribution Center (PDC) Relays, Powertrain Control Module, A580 (R/S) 10 Amp Shifter Assy (BTSI), Trans.
  • Page 339 MAINTAINING YOUR VEHICLE 339 Cartridge Cartridge Cavity Mini-Fuse Description Cavity Mini-Fuse Description Fuse Fuse 50 Amp PTC Heater 1 (Diesel 20 Amp Front Power Win- Only) Blue dows 40 Amp HID Headlamps — Spare Green 40 Amp HVAC Blower 50 Amp PTC Heater 2 (Diesel Green Only)
  • Page 340 340 MAINTAINING YOUR VEHICLE Cartridge Cartridge Cavity Mini-Fuse Description Cavity Mini-Fuse Description Fuse Fuse 30 Amp ABS Pump 20 Amp Final Drive Control Pink Yellow Module (FDCM) 40 Amp Accessory Delay, 15 Amp Brake Lamps Green Seats Blue 40 Amp JB Power 20 Amp HD Washer (If...
  • Page 341 MAINTAINING YOUR VEHICLE 341 Cartridge Cartridge Cavity Mini-Fuse Description Cavity Mini-Fuse Description Fuse Fuse 20 Amp Final Drive Control 20 Amp Subwoofer (SRT Yellow Module (FDCM) Yellow Only) E-Diff — Spare — Spare 25 Amp Coils, Actuators 20 Amp Trail-Tow Mod (Ex- Natural Yellow port Only)
  • Page 342: Underhood Fuses (Integrated Power Module)

    342 MAINTAINING YOUR VEHICLE Underhood Fuses (Integrated Power Module) Cartridge Cavity Mini-Fuse Description Fuse 10 Amp Lt Park Lamps 10 Amp Trailer-Tow Park Lamps 10 Amp Rt Park Lamps 20 Amp Front Control Module Yellow (FCM) Batt #4 20 Amp Front Control Module Yellow (FCM) Batt #2...
  • Page 343 MAINTAINING YOUR VEHICLE 343 Cartridge Cartridge Cavity Mini-Fuse Description Cavity Mini-Fuse Description Fuse Fuse 20 Amp Rear Fog Lamps (Ex- 15 Amp Ignition Off Draw Yellow port Only) Blue (IOD) #1 — Intrusion Module, Satellite 20 Amp Front Control Module Video, Steering Con- Yellow (FCM) Batt #1...
  • Page 344: Vehicle Storage

    344 MAINTAINING YOUR VEHICLE VEHICLE STORAGE REPLACEMENT BULBS If you are leaving your vehicle dormant for more than Interior Lights Bulb Type 21 days you may want to take steps to protect your Glove Box Lamp ......194 battery.
  • Page 345: Bulb Replacement

    MAINTAINING YOUR VEHICLE 345 NOTE: Numbers refer to commercial bulb types that WARNING! can be purchased from your authorized dealer. A transient high tension occurs at the bulb sockets of If a bulb needs to be replaced, visit your authorized High Intensity Discharge (HID) headlamps when the dealer or refer to the applicable Service Manual.
  • Page 346: Halogen Headlamps - If Equipped

    346 MAINTAINING YOUR VEHICLE Halogen Headlamps — If Equipped 3. Disconnect the electrical connector and replace the bulb. 1. Open the hood. 2. Turn the low or high beam bulb one–quarter turn CAUTION! counterclockwise to remove from housing. Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life.
  • Page 347: Front Fog Lamp

    MAINTAINING YOUR VEHICLE 347 CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. Front Fog Lamp 1.
  • Page 348: Rear Tail, Stop, Turn Signal, And Backup Lamps

    348 MAINTAINING YOUR VEHICLE CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. Rear Tail, Stop, Turn Signal, And Backup Lamps 1.
  • Page 349: Center High-Mounted Stop Lamp (Chmsl)

    MAINTAINING YOUR VEHICLE 349 Center High-Mounted Stop Lamp (CHMSL) 1. Remove the two screws securing the CHMSL. 1 — Tail/Stop Lamp Bulb 3 — Back-Up Lamp Bulb 2 — Tail/Turn Signal Bulb 2. Twist the bulb socket to remove from the CHMSL 4.
  • Page 350: Fluid Capacities

    350 MAINTAINING YOUR VEHICLE FLUID CAPACITIES U.S. Metric Fuel (Approximate) 21 Gallons 79 Liters Engine Oil with Filter 6.1 Liter Engine (SAE 5W-40, API Certified) 7 Quarts 6.6 Liters Cooling System * 6.1 Liter Engine (MOPAR Engine Coolant/Antifreeze 5 14.8 Quarts 14 Liters Year/100,000 Mile Formula or equivalent) * Includes heater and coolant recovery bottle filled to MAX level.
  • Page 351: Fluids, Lubricants, And Genuine Parts

    MAINTAINING YOUR VEHICLE 351 FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hy- brid Organic Additive Technology) or equivalent. Engine Oil For best performance and maximum protection under all types of operat- ing conditions, the manufacturer only recommends full synthetic engine oils that meet the requirements of Chrysler Material Standard MS-10725 and are approved to MB 229.3 or MB 229.5.
  • Page 352: Chassis

    352 MAINTAINING YOUR VEHICLE Chassis Component Fluid, Lubricant, or Genuine Part Automatic Transmission MOPAR ATF+4 Automatic Transmission Fluid or equivalent. Transfer Case MOPAR NV146 Transfer Case Fluid or equivalent. Usage of other fluid/ lubricants is NOT recommended. Axle Differential (Front-Rear) MOPAR Synthetic Gear &...
  • Page 353: Maintenance Schedules

    MAINTENANCE SCHEDULES CONTENTS ▫ Required Maintenance Intervals Emissions Control System Maintenance ..354 ..356 Maintenance Schedules ....354...
  • Page 354 354 MAINTENANCE SCHEDULES EMISSIONS CONTROL SYSTEM MAINTENANCE MAINTENANCE SCHEDULES The Scheduled Maintenance services listed in bold type The oil change indicator system will remind you that it is must be done at the times or mileages specified to ensure time to take your vehicle in for scheduled maintenance. the continued proper functioning of the emissions control On Electronic Vehicle Information Center (EVIC) system.
  • Page 355 MAINTENANCE SCHEDULES 355 • Change your engine oil more often if you drive your • Check the windshield washer solvent and add if vehicle off-road for an extended period of time. required. • Under no circumstances should oil change intervals Once a Month exceed 6,000 miles (10,000 km) or 6 months, whichever •...
  • Page 356 356 MAINTENANCE SCHEDULES At Each Oil Change Required Maintenance Intervals Refer to the Maintenance Schedules on the following • Change the engine oil filter. pages for the required maintenance intervals. • Inspect the brake hoses and lines. CAUTION! Failure to perform the required maintenance items may result in damage to the vehicle.
  • Page 357 MAINTENANCE SCHEDULES 357 6,000 Miles (10,000 km) or 12,000 Miles (20,000 km) or 12 Months Maintenance Service 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. Schedule ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the ❏...
  • Page 358: Service Schedule

    358 MAINTENANCE SCHEDULES 18,000 Miles (30,000 km) or 24,000 Miles (40,000 km) or 24 Months Maintenance Service 18 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the ❏...
  • Page 359 MAINTENANCE SCHEDULES 359 30,000 Miles (50,000 km) or 36,000 Miles (60,000 km) or 42,000 Miles (70,000 km) or 30 Months Maintenance 36 Months Maintenance 42 Months Maintenance Service Schedule Service Schedule Service Schedule ❏ Change the engine oil and engine oil ❏...
  • Page 360 360 MAINTENANCE SCHEDULES 48,000 Miles (80,000 km) or 48 Months Maintenance Service 54,000 Miles (90,000 km) or Schedule 54 Months Maintenance ❏ Change the engine oil and engine oil filter. Service Schedule ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the ❏...
  • Page 361 MAINTENANCE SCHEDULES 361 60,000 Miles (100,000 km) or 60 Months Maintenance Service 66,000 Miles (110,000 km) or Schedule 66 Months Maintenance ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Replace the engine air cleaner filter. ❏ Change the engine oil and engine oil ❏...
  • Page 362 362 MAINTENANCE SCHEDULES 72,000 Miles (120,000 km) or 72 Months Maintenance Service 78,000 Miles (130,000 km) or Schedule 78 Months Maintenance ❏ Change the engine oil and engine oil filter. Service Schedule ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the ❏...
  • Page 363 MAINTENANCE SCHEDULES 363 84,000 Miles (140,000 km) or 90,000 Miles (150,000 km) or 84 Months Maintenance 90 Months Maintenance Service Schedule Service Schedule ❏ Change the engine oil and engine oil ❏ Change the engine oil and engine oil filter. filter.
  • Page 364 364 MAINTENANCE SCHEDULES 96,000 Miles (160,000 km) or 96 Months Maintenance Service 102,000 Miles (170,000 km) or Schedule 102 Months Maintenance ❏ Change the engine oil and engine oil filter. Service Schedule ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the ❏...
  • Page 365 MAINTENANCE SCHEDULES 365 108,000 Miles (180,000 km) or 114,000 Miles (190,000 km) or 108 Months Maintenance 114 Months Maintenance Service Schedule Service Schedule ❏ Change the engine oil and engine oil ❏ Change the engine oil and engine oil filter. filter.
  • Page 366 366 MAINTENANCE SCHEDULES 120,000 Miles (200,000 km) or 120 Months Maintenance Service 126,000 Miles (210,000 km) or Schedule 126 Months Maintenance ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Replace the engine air cleaner filter. ❏ Change the engine oil and engine oil ❏...
  • Page 367 MAINTENANCE SCHEDULES 367 132,000 Miles (220,000 km) or 138,000 Miles (230,000 km) or 132 Months Maintenance 138 Months Maintenance Service Schedule Service Schedule ❏ Change the engine oil and engine oil ❏ Change the engine oil and engine oil filter. filter.
  • Page 368 368 MAINTENANCE SCHEDULES 144,000 Miles (240,000 km) or 144 Months Maintenance Service 150,000 Miles (250,000 km) or Schedule 150 Months Maintenance ❏ Change the engine oil and engine oil filter. Service Schedule ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the ❏...
  • Page 369 MAINTENANCE SCHEDULES 369 † This maintenance is recommended by the manufacturer to the owner, but is not required to maintain emissions warranty. WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment.
  • Page 371: If You Need Consumer Assistance

    IF YOU NEED CONSUMER ASSISTANCE CONTENTS ▫ Customer Assistance For The Hearing Or Suggestions For Obtaining Service For Your Vehicle......373 Speech Impaired (TDD/TTY) .
  • Page 372 372 IF YOU NEED CONSUMER ASSISTANCE ▫ Traction Grades Department Of Transportation Uniform Tire ....379 Quality Grades ......379 ▫...
  • Page 373: Suggestions For Obtaining Service For Your Vehicle

    IF YOU NEED CONSUMER ASSISTANCE 373 SUGGESTIONS FOR OBTAINING SERVICE FOR the service advisor and list the items in order of priority. YOUR VEHICLE At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it Prepare For The Appointment is advisable to make these arrangements when you call If you’re having warranty work done, be sure to have the...
  • Page 374: Chrysler Group Llc Customer Center

    374 IF YOU NEED CONSUMER ASSISTANCE • Vehicle delivery date and mileage This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- Chrysler Group LLC Customer Center solved with this process. P.O.
  • Page 375: Customer Assistance For The Hearing Or Speech Impaired (Tdd/Tty)

    IF YOU NEED CONSUMER ASSISTANCE 375 Customer Assistance For The Hearing Or Speech the manufacturer’s service contracts. If you purchased a Impaired (TDD/TTY) manufacturer’s service contract, you will receive Plan To assist customers who have hearing difficulties, the Provisions and an Owner Identification Card in the mail manufacturer has installed special TDD (Telecommuni- within three weeks of the vehicle delivery date.
  • Page 376: Warranty Information (U.s. Vehicles Only)

    376 IF YOU NEED CONSUMER ASSISTANCE We appreciate that you have made a major investment WARRANTY INFORMATION (U.S. Vehicles Only) when you purchased the vehicle. An authorized dealer See the Warranty Information Booklet, located on the has also made a major investment in facilities, tools, and DVD, for the terms and provisions of Chrysler Group training to assure that you are absolutely delighted with LLC warranties applicable to this vehicle.
  • Page 377: In Canada

    IF YOU NEED CONSUMER ASSISTANCE 377 If NHTSA receives similar complaints, it may open an In Canada investigation, and if it finds that a safety defect exists in If you believe that your vehicle has a safety defect, you a group of vehicles, it may order a recall and remedy should contact the Customer Service Department imme- campaign.
  • Page 378 378 IF YOU NEED CONSUMER ASSISTANCE • Service Manuals • Owner’s Manuals These comprehensive Service Manuals provide the in- These Owner’s Manuals have been prepared with the formation that students and professional technicians assistance of service and engineering specialists to need in diagnosing/troubleshooting, problem solving, acquaint you with specific Chrysler Group LLC ve- maintaining, servicing, and repairing Chrysler Group...
  • Page 379 IF YOU NEED CONSUMER ASSISTANCE 379 DEPARTMENT OF TRANSPORTATION UNIFORM significantly from the norm due to variations in driving TIRE QUALITY GRADES habits, service practices, and differences in road charac- The following tire grading categories were established by teristics and climate. the National Highway Traffic Safety Administration.
  • Page 380 380 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades WARNING! The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat The temperature grade for this tire is established for and its ability to dissipate heat, when tested under a tire that is properly inflated and not overloaded.
  • Page 381 INDEX...
  • Page 382 382 INDEX ABS (Anti-Lock Brake System) ... . 159,251 Antenna, Satellite Radio ....214 Adding Engine Coolant (Antifreeze) .
  • Page 383 INDEX 383 Battery ....... 317 Calibration, Compass ..... 177 Emergency Starting .
  • Page 384 384 INDEX Check Engine Light Universal Consumer Interface (UCI) ..208 (Malfunction Indicator Light) ....311 Console, Overhead ..... . . 127 Checking Your Vehicle For Safety .
  • Page 385 INDEX 385 Daytime Running Lights ....103 Electronic Brake Control System ... . . 254 Dealer Service .
  • Page 386 386 INDEX Engine Engine Oil Viscosity Chart ....315 Air Cleaner Filter ..... . 316 Enhanced Accident Response Feature .
  • Page 387 INDEX 387 Fluid, Brake ......329 Filler Cap (Gas Cap) ....285 Fluid Capacities .
  • Page 388 388 INDEX Speedometer ......156 High Beam/Low Beam Select (Dimmer) Switch . . 106 Tachometer ......159 Hitches Gear Ranges .
  • Page 389 INDEX 389 Interior Appearance Care ....334 Lane Change Assist ..... . 106 Interior Fuses .
  • Page 390 390 INDEX Brake Warning ......156 Instrument Cluster ....100,103 Bulb Replacement .
  • Page 391 INDEX 391 Turn Signal ....73,100,106,346,348 Maintenance Schedules ....354 Vanity Mirror .
  • Page 392 392 INDEX MTBE/ETBE ......281 Recommendation ....315,350 Multi-Function Control Lever .
  • Page 393 INDEX 393 Pets, Transporting ......69 Programming Transmitters Phone, Cellular ......83 (Remote Keyless Entry) .
  • Page 394 394 INDEX Refrigerant ......319 Run Flat Feature ......270 Reminder, Lights On .
  • Page 395 INDEX 395 Maintenance ......335 Sentry Key (Immobilizer) ....15 Pretensioners .
  • Page 396 396 INDEX Speed Control (Cruise Control) ....115 Sun Roof ......134 Speedometer .
  • Page 397 INDEX 397 Tire Safety Information ....261 Tow Hooks, Emergency ....304 Tires .
  • Page 398 398 INDEX Automatic ......242,330 Vanity Mirrors ......82 Shifting .
  • Page 399 INDEX 399 Wheel and Wheel Trim Care ....333 Fluid ....... 320 Wind Buffeting .

Table of Contents