Phone Call Features - Jeep 2010 Wrangler Owner's Manual

JOBNAME: CHRY OM INTL (Conten PAGE: 65 SESS: 2 OUTPUT: Wed Aug 25 08:13:16 2010 SUM: 4B7E35C9
/chry_pdm/chrysler/owners/wra/og
• After the "Ready" prompt and the following
beep, say "Phonebook List Names".
• The Uconnect™ Phone will play the names
of all the phonebook entries, including the
downloaded phonebook entries, if available.
• To call one of the names in the list, press the
button during the playing of the de-
sired name, and say "Call".
NOTE:
The user can also exercise "Edit" or "De-
lete" operations at this point.
• The Uconnect™ Phone will then prompt you
as to the number designation you wish to
call.
• The selected number will be dialed.

Phone Call Features

The following features can be accessed
through the Uconnect™ Phone if the feature(s)
are available on your mobile service plan. For
example, if your mobile service plan provides
three-way calling, this feature can be accessed
through the Uconnect™ Phone. Check with
your mobile service provider for the features
that you have.
Answer or Reject an Incoming Call - No
Call Currently in Progress
When you receive a call on your mobile phone,
the Uconnect™ Phone will interrupt the vehicle
audio system, if on, and will ask if you would
like to answer the call. Press the
accept the call. To reject the call, press and
hold the button until you hear a single
beep indicating that the incoming call was
rejected.
Answer or Reject an Incoming Call - Call
Currently in Progress
If a call is currently in progress and you have
another incoming call, you will hear the same
network tones for call waiting that you normally
hear when using your mobile phone. Press the
button to place the current call on hold and
answer the incoming call.
NOTE:
The Uconnect™ Phone compatible phones
in the market today do not support rejecting
an incoming call when another call is in
progress. Therefore, the user can only an-
swer an incoming call or ignore it.
Making a Second Call While Current Call in
Progress
To make a second call while you are currently
on a call, press the
or "Call" followed by the phone number or
phonebook entry you wish to call. The first call
button to
will be on hold while the second call is in
progress. To go back to the first call, refer to
"Toggling Between Calls". To combine two
calls, refer to "Conference Call".
Place/Retrieve a Call From Hold
To put a call on hold, press the
you hear a single beep. This indicates that the
call is on hold. To bring the call back from hold,
press and hold the
single beep.
Toggling Between Calls
If two calls are in progress (one active and one
on hold), press the
single beep indicating that the active and hold
status of the two calls have switched. Only one
call can be placed on hold at one time.
button and say "Dial"
button until
button until you hear a
button until you hear a
63