Mitsubishi Electric LMAP03U Technical Manual page 72

Function – [Communication Timing]
Function [Communication Timing]
Description Defines the network communication start timing at the powering of the LM ADAPTER.
Using CP 【nciSet_1】
Control unit LM ADAPTER
Relating CP
【nciStartHrtBt】 【nciStartOutTm】 【nciInitStartTm】
Data holding Memorizing set values in nonvolatile memory.
Reference NV Nothing
To be used for setting of the timing to start the operation of Neuron Chip after completing the initialization. While
Purpose
the Neuron Chip is stopped during the initialization setting of LM ADAPTER with air conditioners.
Outline of At the set time after powering, the operation of Neuron Chip will start enabling the LonWorks communication of
operation LM ADAPTER.
Communication Image
① [initialize]
②[setting time]
Related configuration property
- Send Start Time 【nciStartOutTm】
- Send Heartbeat Start Time 【nciStartHrtBt】
- Initialize Start Time【nciInitStartTm】
Caution
- This does not represent the start timing of the output at changing (event output). Setting is required by the configuration property
(Send Start Time 【nciStartOutTm】) additionally.
BMS
Power Recovery
NC will not reply
BMS
Power Recovery
NC will not reply
69
LM-AP
Poll demand
Initialization setting of LM ADAPTER
Poll demand
response
LM-AP
Poll demand
Initialization setting of LM ADAPTER
Poll demand
Poll demand
response
LMAP03U
IC_01
IC_01