Object - Mitsubishi Electric LMAP03U Technical Manual

4.3.3 External contact input/output
The external contact input/output function is not provided to LM ADAPTER.
4.3.4 Power supply to M-NET transmission line
The M-NET centralized system controller line should be powered. For the system using other system
controller or that with LOSSNAY only, the power supply unit for transmission line is required. In accordance
with the system configuration, the setting of LM ADAPTER and outdoor units should partially be changed.
Please conduct the setting operation by referring to the "Installation Manual" of LM ADAPTER. For the power
supply capacity of the power supply unit and the selection of the unit, please refer to the manuals (like DATA
BOOK) of each air conditioner.

4.4 Object

4.4.1 Network variables and objects
The network variables provided allows the LA ADAPTER to operate/monitor plural equipment (indoor unit,
LOSSNAY, etc.) The functional profile (object) represents the network variables collected for each objective
equipment to be controlled. Here the objects and network variables are outlined, and the relationship with air
conditioners is explained. For the detail of each object and the specification of the network variables, please
refer to the "Network Variables Specification" of each product.
(1) Object configuration of LM ADAPTER
Node
Object
For node object
Installation of power supply unit
LMAP02-E
Not required
LMAP03U
Indoor [0]
For collective variables
and configuration property
14
Individual With SC
Required
Indoor [1]
For indoor unit
Indoor [50]