Mitsubishi Electric LMAP03U Technical Manual page 65

Function – [Effective Time_2]
Function [Effective Time_2]
Description Defines the valid time of nviAllPro (Request Collective Operation Prohibit)
Using CP 【nciEffectTm_2】
Control unit LM ADAPTER
Relating CP Nothing
Data holding Memorizing set values in nonvolatile memory.
Reference NV nviAllPro
This is to set the time to continue collective operation prohibit.
Purpose
During the time when the operation prohibit is valid, the individual operation prohibit setting will not be reflected.
"Collective Local Prohibit "
Upon receipt of collective operation prohibiting request by 【nviAllPro】(Request Collective Operation Prohibit),
the operation (ON-OFF mode/Temperature setting) of the local remote controller connected to all units
Outline of controlled with LM ADAPTER will be prohibited.
operation The operation prohibit is valid within the set time, and during this time, the setting by the operation prohibit of
the individual local remote controller （【nviProOnOff_n】【nviProMode_n】【nviProSetP_n】） will be reserved.
As the set time is passed, the collective operation prohibiting state is cancelled, and the operation prohibiting
request such as 【nviProOnOff】, etc. received during the effective time will be reflected.
Communication Image
①Update within the set time
②Operation within the set
③No update within the set
Restrictions
- Operation prohibit state can not be cancelled by nviAllPro.
The time minimization of this configuration property should be applied.
Cautions
- The operation by the system controller is possible.
- The command from the LonWorks network under operation prohibit is valid.
BMS
[Enable] operation
state [Enable]
[Enable] operation
state [Enable]
IC_01[Prohibit ON/OFF]
state [disable]
62
LM-AP
[Prohibit (Batch)] operation
[Prohibit (Batch)] operation
[Permit (Batch)]
IC_01[Prohibit ON/OFF]
LMAP03U
IC (All)