Download Print this page

Mitsubishi Electric CC-Link User Manual

Embedded i/o adapter.
Hide thumbs

Advertisement

CC-Link Embedded I/O Adapter
User's Manual

Advertisement

   Related Manuals for Mitsubishi Electric CC-Link

   Summary of Contents for Mitsubishi Electric CC-Link

  • Page 1

    CC-Link Embedded I/O Adapter User's Manual...

  • Page 3: Safety Precautions

    (2) Turn off all output from Remote I/O station. • The output may be left ON or OFF due to trouble in the CC-Link embedded I/O adapter. Configure a circuit to monitor I/O signals which may lead to a serious accident..

  • Page 4: Installation Precautions

    • Do not directly touch the CC-Link embedded I/O adapter's conductive parts. Doing so could cause malfunction or failure in the CC-Link embedded I/O adapter. • Securely solder the CC-Link embedded I/O adapter to install it to a user board. Defective contact could cause malfunction.

  • Page 5

    • Do not disassemble or modify the CC-Link embedded I/O adapter. Doing so could cause failure, malfunction, injury or fire. • Because the case of the CC-Link embedded I/O adapter is made of resin, be careful not to drop it or expose it to strong impact.

  • Page 6

    This manual confers no industrial property rights or any rights of any other kind, nor does it confer any patent licenses. Mitsubishi Electric Corporation cannot be held responsible for any problems involving industrial property rights which may occur as a result of using the contents noted in this manual.

  • Page 7: Table Of Contents

    1- 1 to 1- 5 1.1 Features ..............................1- 1 1.2 Identifying the Compact CC-Link Embedded I/O Adapter Type ............1- 2 1.3 Cautionary Notes when Selecting a CC-Link Embedded I/O Adapter..........1- 3 1.4 Specification List ............................. 1- 4 1.5 About the Generic, Abbreviated and Technical Terms Used in This Manual........

  • Page 8

    This manual describes the system configuration, performance specification, function, handling, wiring (13JL91) and troubleshooting for QJ61BT11 (Sold separately) CC-Link System Master ( Local Module type AJ61BT11/A1SJ61BT11 User's Manual IB-66721 This manual describes the system configuration, performance specification, function, handling, wiring (13J872) and troubleshooting for AJ61BT11 and A1SJ61BT11.

  • Page 9: Overview

    1 OVERVIEW MELSEC-A 1 OVERVIEW This manual describes the specifications of the CC-Link embedded I/O adapter used as the remote I/O station of a Control & Communication Link (hereafter abbreviated to CC-Link) system. 1.1 Features The following are the features of the CC-Link embedded I/O adapter.

  • Page 10: Identifying The Compact Cc-link Embedded I/o Adapter Type

    1 OVERVIEW MELSEC-A 1.2 Identifying the Compact CC-Link Embedded I/O Adapter Type The following shows how to identify the type of a CC-Link embedded I/O adapter. AJ65MBTL1N-16DT : 24VDC input : Transistor output : 24VDC input, transistor output complex 16: 16 points...

  • Page 11: Cautionary Notes When Selecting A Cc-link Embedded I/o Adapter

    The following explains the cautionary notes and specifications that apply when selecting a CC-Link embedded I/O adapter for use in the CC-Link system: (1) This is a embedded I/O adapter designed specifically for the CC-Link system. Do not connect the adapter to other data-link systems, such as the MELSECNET/MINI.

  • Page 12: Specification List

    CC-Link embedded I/O Generic term for the AJ65MBTL1N- CC-Link embedded I/O adapter adapter CC-Link embedded input Generic term for the AJ65MBTL1N- D CC-Link embedded input adapter adapter CC-Link embedded output Generic term for the AJ65MBTL1N- T CC-Link embedded output adapter adapter...

  • Page 13

    1 OVERVIEW MELSEC-A MEMO 1 - 5 1 - 5...

  • Page 14: Names And Settings For Each Part

    2 NAMES AND SETTINGS FOR EACH PART MELSEC-A 2 NAMES AND SETTINGS FOR EACH PART The names and settings for the component of the CC-Link embedded I/O adapter are shown below. AJ65MBTL1N-16 AJ65MBTL1N-32 Item Description Operating status indicator LEDs LED name...

  • Page 15

    2 NAMES AND SETTINGS FOR EACH PART MELSEC-A Item Description Transmission speed setting Setting switch status Transmission Setting value speed 156 kbps 625 kbps 2.5 Mbps 5.0 Mbps 10 Mbps Be sure to set the transmission speed within the above range. Station number setting switches Select "10,"...

  • Page 16: Specifications

    3 SPECIFICATIONS MELSEC-A 3 SPECIFICATIONS This section explains the CC-Link embedded I/O adapter general specifications. Table 3.1 General specifications Item Specifications Operating ambient 0 to 55 °C temperature Storage ambient -20 to 75 °C temperature Operating ambient 10 to 90 % RH, No condensation...

  • Page 17

    3 SPECIFICATIONS MELSEC-A MEMO 3 - 2 3 - 2...

  • Page 18: Specifications For Cc-link Embedded I/o Adapter

    4 SPECIFICATIONS FOR CC-LINK EMBEDDED I/O ADAPTER MELSEC-A 4 SPECIFICATIONS FOR CC-LINK EMBEDDED I/O ADAPTER 4.1 Specifications for Input Adapters 4.1.1 AJ65MBTL1N-16D CC-Link embedded input adapter Form DC input adapter Specification AJ65MBTL1N-16D Surface shape Number of input points 16 points...

  • Page 19

    4 SPECIFICATIONS FOR CC-LINK EMBEDDED I/O ADAPTER MELSEC-A External connection Signal Signal Pin No. Pin No. Circuit board AJ65MBTL1N-16D name name Signal Singnal Pin No. name name Link OE-OUT OE-IN To G/A OE-OUT SD-OUT SD-IN OE-IN To G/A RDGON SD-OUT...

  • Page 20: Aj65mbtl1n-32d Cc-link Embedded Input Adapter

    4 SPECIFICATIONS FOR CC-LINK EMBEDDED I/O ADAPTER MELSEC-A 4.1.2 AJ65MBTL1N-32D CC-Link embedded input adapter Form DC input adapter Specification AJ65MBTL1N-32D Surface shape Number of input points 32 points Isolation method Photocoupler Rated input voltage 24V DC Rated input current Approx. 4mA Operating voltage range 19.2 to 26.4V DC...

  • Page 21

    4 SPECIFICATIONS FOR CC-LINK EMBEDDED I/O ADAPTER MELSEC-A External connection Signal Signal Pin No. Pin No. Circuit board AJ65MBTL1N-32D name name Signal Signal Pin No. name name Link OE-OUT OE-IN To G/A OE-OUT SD-OUT SD-IN OE-IN RDGON To G/A SD-OUT...

  • Page 22: Specifications For Output Adapters

    4 SPECIFICATIONS FOR CC-LINK EMBEDDED I/O ADAPTER MELSEC-A 4.2 Specifications for Output Adapters 4.2.1 AJ65MBTL1N-16T CC-Link embedded output adapter Form Transistor output adapter Surface shape Specification AJ65MBTL1N-16T Number of output points 16 points Isolation method Photocoupler Rated load voltage 12/24V DC Operating load voltage 10.2 to 26.4V DC (ripple ratio: within 5%)

  • Page 23

    4 SPECIFICATIONS FOR CC-LINK EMBEDDED I/O ADAPTER MELSEC-A External connection Signal Signal Pin No. Pin No. Circuit board AJ65MBTL1N-16T name name Signal Singnal Pin No. name name Link OE-OUT OE-IN To G/A OE-OUT SD-OUT SD-IN OE-IN RDGON To G/A SD-OUT...

  • Page 24: Aj65mbtl1n-32t Cc-link Embedded Output Adapter

    4 SPECIFICATIONS FOR CC-LINK EMBEDDED I/O ADAPTER MELSEC-A 4.2.2 AJ65MBTL1N-32T CC-Link embedded output adapter Form Transistor output adapter Surface shape Specification AJ65MBTL1N-32T Number of output points 32 points Isolation method Photocoupler Rated load voltage 12/24V DC Operating load voltage 10.2 to 26.4V DC (ripple ratio: within 5%) range Max.

  • Page 25

    4 SPECIFICATIONS FOR CC-LINK EMBEDDED I/O ADAPTER MELSEC-A External connection Signal Signal Pin No. Pin No. Circuit board AJ65MBTL1N-32T Signal Signal name name Pin No. name name Link OE-OUT OE-IN To G/A OE-OUT SD-OUT SD-IN OE-IN To G/A RDGON SD-OUT...

  • Page 26: Specifications For Combined Adapters

    4 SPECIFICATIONS FOR CC-LINK EMBEDDED I/O ADAPTER MELSEC-A 4.3 Specifications for Combined Adapters 4.3.1 AJ65MBTL1N-16DT CC-Link embedded combined adapter Form DC input transistor output combined adapter Specification AJ65MBTL1N-16DT Surface shape Input specification Output specification Number of input points 8 points...

  • Page 27

    4 SPECIFICATIONS FOR CC-LINK EMBEDDED I/O ADAPTER MELSEC-A External connection Signal Signal Pin No. Pin No. name name Circuit board AJ65MBTL1N-16DT Signal Singnal Pin No. name name Link OE-OUT OE-IN SD-OUT SD-IN To G/A OE-OUT RDGON OE-IN To G/A Empty...

  • Page 28: Handling Cc-link Embedded I/o Adapter 5- 1 To

    • Do not directly touch the CC-Link embedded I/O adapter's conductive parts. Doing so could cause malfunction or failure in the CC-Link embedded I/O adapter. • Because the case of the CC-Link embedded I/O adapter is made of resin, be careful not to drop it or expose it to strong impact.

  • Page 29

    Make the transmission patterns (DA, DB) as short as possible. Design the patterns so that the capacitance is 20pF or less with the CC-Link embedded I/O adapter mounted on the board. (Guidelines: Pattern length 5cm or less, pattern width 0.18mm or less)

  • Page 30

    (b) Do not touch the pins of the CC-Link embedded I/O adapter directly. Doing so can cause the deterioration of solderability. (c) Do not bend or cut the pins of the CC-Link embedded I/O adapter. In addition, do not use the CC-Link embedded I/O adapter that has been dropped, impacted and/or stressed.

  • Page 31

    5 HANDLING CC-LINK EMBEDDED I/O ADAPTER MELSEC-A (4) Precautions for T-branch system configuration When configuring a T-branch system, use any of the following CC-Link master modules. Module type Hardware version QJ61BT11 All versions usable AJ61BT11 D or later AJ61QBT11 D or later...

  • Page 32: Cascading Method

    5 HANDLING CC-LINK EMBEDDED I/O ADAPTER MELSEC-A 5.2 Cascading Method The CC-Link embedded I/O adapters can be cascaded. Up to two adapters can be installed side by side in the same board. Cascade the adapters as shown below. The following diagram gives an example of 16-point CC-Link embedded I/O adapters.

  • Page 33: Connection Method Of Cc-link Dedicated Cable

    • Always ground the FG terminal to the protective ground conductor. Doing so may cause electric shock or malfunction. • Securely solder the CC-link embedded I/O adapter to install it to a user board. Defective contact could cause malfunction. • Make sure that the communication cable connected to the adapter is kept in the duct or fixed with cramps.

  • Page 34

    Terminal resistor 2 Use the CC-Link dedicated cables in the CC-Link system. If the cables other than the CC-Link dedicated cables are used, we cannot guarantee the performance of the CC-Link system. Refer to the CC-Link Partner Association Home Page: http://www.cc-link.org/ for the specifications and contact information of the CC-Link dedicated cables.

  • Page 35: Troubleshooting

    The following table lists causes and corrective actions for errors indicated by LEDs on the CC-Link embedded I/O adapter when the SW, M/S and PRM LEDs are all off (i.e. the master module is set properly) in the system configuration example shown below.

  • Page 36

    LED status Cause Corrective action Master CC-Link embedded I/O adapter module The L RUN light on the CC-Link Restart the power supply after the transmission L RUN L RUN L RUN embedded I/O adapter B is off, indicating speed is set correctly.

  • Page 37: Examples Of Errors For Cc-link Embedded I/o Adapter

    6 TROUBLESHOOTING MELSEC-A 6.2 Examples of Errors for CC-Link Embedded I/O Adapter This section explains examples of errors that occur in the input circuit, and the appropriate corrective actions. 6.2.1 Errors occurring in the input circuit and corrective actions Examples of errors that occur in the input circuit and corrective actions are explained...

  • Page 38

    6 TROUBLESHOOTING MELSEC-A <Sample calculation for example 1> AJ65MBTL1N-16D CC-Link When a 2.45 mA leakage current flows due embedded Leakage 2.45 mA to a switch with LED indicator connected to current input the AJ65MBTL1N-16D. adapter 4.7 k 24 V DC •...

  • Page 39: Errors Occurring In The Output Circuit And Corrective Actions

    6 TROUBLESHOOTING MELSEC-A 6.2.2 Errors occurring in the output circuit and corrective actions Examples of errors that occur in the output circuit and corrective actions are explained below: Condition Cause Corrective action Erroneous output due to the stray capacitance (C) When the external power turns ON/OFF, between collector and emitter of hotocoupler.

  • Page 40: Appendix

    APPENDIX MELSEC-A APPENDIX Appendix 1 External Dimensions Appendix 1.1 AJ65MBTL1N-16 53 (2.09) Unit: mm (inch) [Recommended board dimension drawing] (top view) 0.95 0.04 5.5 (0.22) 5.5 (0.22) 2 (0.08) 0.05 42 (1.65) Unit: mm (inch) App - 1 App - 1...

  • Page 41: Appendix 1.2 Aj65mbtl1n-32

    APPENDIX MELSEC-A Appendix 1.2 AJ65MBTL1N-32 (3.35) Unit: mm (inch) [Recommended board dimension drawing] (top view) 0.95 0.04 5.5 (0.22) 19.5 (0.77) 2 (0.08) 0.05 60 (2.36) Unit: mm (inch) App - 2 App - 2...

  • Page 42

    WARRANTY Please confirm the following product warranty details before using this product. 1. Gratis Warranty Term and Gratis Warranty Range If any faults or defects (hereinafter "Failure") found to be the responsibility of Mitsubishi occurs during use of the product within the gratis warranty term, the product shall be repaired at no cost via the sales representative or Mitsubishi Service Company.

  • Page 44

    SH(NA)-080324E-D(0609)MEE MODEL: CC-LINK-M-I/O-U-E MODEL CODE: 13JR59 HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN NAGOYA WORKS : 1-14 , YADA-MINAMI 5-CHOME , HIGASHI-KU, NAGOYA , JAPAN When exported from Japan, this manual does not require application to the Ministry of Economy, Trade and Industry for service transaction permission.

Comments to this Manuals

Symbols: 0
Latest comments: