Mitsubishi Electric LMAP03U Technical Manual page 44

Function – [Local Prohibit]
Function [Request Local Prohibit] [Local Prohibit State]
Description Monitoring and setting the prohibit/permit of operation of the remote controller to be connected with indoors unit
and ventilation unit.
Using NV ON/OFF: 【nviProOnOff_n】 【nvoProOnOff_n】
Mode : 【nviProMode_n】 【nvoProMode_n】
SetPoint: 【nviProSetP_n】 【nvoProSetP_n】
Control unit Indoor unit
Outline of Setting the prohibit/permit of each operation for each unit.
operation When operation is prohibited, the operation can not be done from the local remote controller, however, it can be
carried out from LM ADAPTER.
If other system controllers are used together, LM ADAPTER can not prohibit their operation.
Communication
① Operation from BMS
Effective Time（＊1）
Restrictions
- Types of local remote controller
This function is effective to use MA remote controller and ME remote controller for the local remote controller.
- Prohibit/permit of local remote controller for ventilation units
The prohibit/permit setting for the local remote controller of LOSSNAY individually operating is only possible when OA processing unit
is controlled with MA remote controller. In this case, turn on the function setting switch (SW1-1) of LMAP.
- Effective time of operation prohibit for local remote controller (LMAP03U only)
The operation prohibit setting of the local remote controller will automatically be the operation permit of the local remote controller, if
the effective time passes without set value renewal or poll/fetch demand within the effective time being set by the "Receive
Heartbeat_1 【nciRevHrtBT_1】".
BMS
[Prohibit] operation
state [Prohibit]
state [Permit]
41
LM－AP
[Prohibit] operation
state [Prohibit]
[Permit] operation
state [Permit]
*1: Setting by Receive Heartbeat_1 【nciRcvHrtBt_1】
LMAP03U
IC
"CENTRALLY CONTROLLED"
display
Remote controller buttons
are locked.
"CENTRALLY CONTROLLED"
goes off
Remote controller buttons
are unlocked.