Mitsubishi Electric LMAP03U Technical Manual page 71

Function – [Local Display Setting]
Function [Local Display_1] [Local Display_2]
Description Defines the presence of the automatic actual operation mode display on the local remote controller.
Using CP 【nciRmDsp_1】 【nciRmDsp_2】
Control unit LM ADAPTER
Relating CP Nothing
Using NV 【nviRmLck】 【nviRmLim】
Data holding Memorizing set values in nonvolatile memory.
Reference NV Nothing
Used for switching over the display of operation mode and room temperature alternately on the local remote
Purpose
controller
Outline of "Automatic actual operation mode"
operation Selecting the presence of display for the operation mode (automatic cooling, automatic heating) actually
working on the models operable automatically.
"Room temperature display"
Selecting the presence of display for room temperature.
With this configuration property, the presence of display for the actual operation mode of local remote
controller is set. The set detail is reflected on the local remote controller at the renewal of 【nviRmLim】
and 【nviRmLck】.
Communication Image
① "Automatic actual operation mode " changing
"Automatic actual operation mode[enable]
"Room temperature display " [enable]
① "Room temperature display " changing
"Automatic actual operation mode" [enable]
"Room temperature display " [disable]
Restrictions
- Effective only for the local remote controller with function to change over the presence of display
- Effective only for the local remote controller set to the standard model.
Caution
- Setting to local remote controllers collectively
BMS
Setting
[nciRmDsp_1]
Setting
[nviRmLck / nviRmLim]
Setting
[nciRmDsp_2]
Setting
[nviRmLck / nviRmLim]
68
LM-AP
"Automatic actual operation mode[enable]
"Room temperature display " [enable]
"Automatic actual operation mode[enable]
"Room temperature display " [disable]
LMAP03U
RC_101