Mitsubishi Electric LMAP03U Technical Manual page 18

(2) Object and equipment address
The object for indoor units is individually related with the objective equipment for control. The object (Indoor
[1] ~ Indoor [50]) corresponds to the indoor unit (LOSSNAY, ventilation unit, Mr. SLIM) with the M-NET
address of 01 ~ 50 being set to each equipment.
M-NET centralized
control transmission line
4.4.2 Network variables and air conditioner address
LM ADAPTER owns the network variables for each air conditioner. The network variables include
set/monitor of an air conditioner individually and to set/monitor of all air conditioners collectively.
Please set so that the M-NET address of the objective air conditioner for control will agree to the name of the
variable.
M-NET centralized
control transmission line
Outdoor unit
IC
051
001
Indoor [1] Indoor [2]
Object of LM ADAPTER
Outdoor unit
051
Indoor [1]
For No.1 indoor unit
Network variable name → Function name + M-NET address (3-digit display)
Relationship between M-NET address and Network variables
IC IC
002 003
M-NET Indoor-outdoor
transmission line
Indoor [3]
IC IC
001 002
M-NET Indoor-outdoor
transmission line
Request On/Off
：nviOnOff_001
On/Off run state
：nvoOnOff_001
SetPoint
：nviSetP_001
SetPoint state
：nvoSetP_001
：
：
：
15
Legend
OC:Outdoor unit
IC:Indoor unit
IC
05
M-NET
address
IC
003
：
：
：