Table of Contents
Advertisement
Digital CELEBRIS Pentium PC
Installing Video Memory
The CELEBRIS Pentium computer comes standard with 1 MB of video memory. This amount can be
increased to 2 MB by installing a 1 MB video memory DRAM chip in the designated socket on the main
logic board.
To install the video memory upgrade chip:
1)
Turn off the computer.
2)
Disconnect external devices, ac power, and monitor power.
3)
Unlock and remove cover.
4)
Remove upgrade chip from packaging and install in socket.
5)
Replace and lock cover.
6)
Connect external devices and restore power.
7)
Reboot the computer to configure it for additional video memory.
Figure 3 - 23 Installing Video Memory
MCS Logistics Engineering - Nijmegen
A
Service Procedures
DEC00299-5
57
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
