Epp3Smc.exe; Video Drivers & Utilities; Setting High Resolution Mode For The Monitor Display; Smode.exe - Digital Equipment CELEBRIS Pentium PC Service Maintenance Manual

Digital CELEBRIS Pentium PC
5) Press [Enter] to continue. Else, press [Esc] to cancel.
Once [Enter] has been pressed, PHLASH.EXE automatically updates the computer's BIOS.
After the flashing process completes, the computer automatically reboots itself so changes
immediately take effect.
6) Remove the system utilities diskette.

EPP3SMC.EXE

EPP3SMC.EXE can be executed as an MS-DOS command or added to the CONFIG.SYS file as a device
driver. In either case, use the BIOS Setup utility to set the parallel port to EPP mode.
Video Drivers & Utilities
The following topics describe how to use the video utilities and install video drivers on the computer:

SMODE.EXE

SMTR.EXE
DOS Video Drivers
Windows 3.x Drivers

Setting High Resolution Mode for The Monitor Display

To use the high resolution modes on the computer, perform the following steps:
1) Use the BIOS Setup utility to set correctly the Video System option.
2) Use SMTR.EXE from the VGA Utilities and DOS Video Drivers diskette to set correctly a Monitor
Type.
3) Use Windows Setup to copy the appropriate video driver into Windows.
CAUTION
Do not connect a low resolution monitor to a system that has been configured with
high-resolution video drivers.
High resolution drivers can damage a 640 x 480 monitor.
SMODE.EXE
The SMODE utility allows the main logic board's video circuitry to emulate and display non-standard
VGA modes. With SMODE, you can run software applications written for the following non-VGA modes:
♦
Monochrome adapter (MDA)
♦
Color graphics adapter (CGA)
♦
Expanded graphics adapter (EGA)
♦
Hercules monochrome graphics adapter (HGC)
MCS Logistics Engineering - Nijmegen
Utilities & Configuration
15